RS PRO 12 V, T1 Sealed Lead Acid Battery, 1.2 Ah, 52mm x 97 mm
- N° de stock RS:
- 150-1558
- Numéro d'article Distrelec:
- 304-24-399
- Fabricant:
- RS PRO
Sous-total (1 unité, dans une boîte de 1)*
18,51 €
(TVA exclue)
22,40 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 24 unité(s) prête(s) à être expédiée(s)
- Plus 1 093 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Boîte(s) | La Boite |
|---|---|
| 1 + | 18,51 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 150-1558
- Numéro d'article Distrelec:
- 304-24-399
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Sealed Lead Acid Battery | |
| Battery Capacity | 1.2Ah | |
| Nominal Voltage | 12V | |
| Construction | AGM | |
| Flame Resistant | Yes | |
| Designed for Cyclic Application | No | |
| Application | Stand by Use | |
| Designed for High Rate Application | No | |
| Eurobat Classification | 3 to 5 Years | |
| Termination Type | T1 | |
| Maximum Operating Temperature | 50°C | |
| Minimum Operating Temperature | -20°C | |
| Series | RS PRO | |
| Weight | 570g | |
| Width | 52mm | |
| Standards/Approvals | No | |
| Height | 97mm | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Sealed Lead Acid Battery | ||
Battery Capacity 1.2Ah | ||
Nominal Voltage 12V | ||
Construction AGM | ||
Flame Resistant Yes | ||
Designed for Cyclic Application No | ||
Application Stand by Use | ||
Designed for High Rate Application No | ||
Eurobat Classification 3 to 5 Years | ||
Termination Type T1 | ||
Maximum Operating Temperature 50°C | ||
Minimum Operating Temperature -20°C | ||
Series RS PRO | ||
Weight 570g | ||
Width 52mm | ||
Standards/Approvals No | ||
Height 97mm | ||
Statut RoHS : Exempté
- Pays d'origine :
- CN
RS Pro Sealed Lead-Acid Batteries
RS Pro Sealed Lead-Acid Batteries. Ideal for uninterruptible power supply and emergency backup. Theses gel constructed batteries can be stored for more than six months and are valve regulated, maintenance free.
What are AGM Batteries?
AGM batteries differ from flooded lead acid batteries in that the electrolyte is held in the glass mats, as opposed to freely flooding the plates. Glass fibres are woven into a mat to increase surface area enough to hold sufficient electrolyte on the cells for their lifetime.
Why choose this product?
RS Pro batteries in this range are entirely maintenance free and can be mounted in any orientation without the risk of leakage. They are highly efficient, suitable for air transport and have excellent discharge recovery properties.
Features and Benefits
• Sealed with special compound epoxy and using pressure controlled vent valves
• Starved electrolyte design - acid solution is absorbed in separators
• Non-spill - can be operated in any position
• Maintenance free, no water adding required
• Deep discharge protection
• Plate grids from lead-calcium alloy, free of antimony
• No corrosion
• Installs vertically or horizontally
• Low gassing (unless overcharged)
• Good cycling and stationary performance
• Good high rate discharges
• Long shelf life
• Rugged and vibration-resistant
Application Information
RS Pro maintenance free Sealed Lead-Acid Batteries are suitable for use in various applications, including:
• Emergency lighting
• Auto control systems
• Railway and aircraft signalling
• Alarms and security
• Electronic equipment
• Communication power supply
• DC power supply
Standards
UL94-V0