Nexperia 74LVC573APW,118 8-Bit Octal D Type Latch, Transparent, 3 State, 20-Pin TSSOP
- N° de stock RS:
- 170-5424
- Référence fabricant:
- 74LVC573APW,118
- Fabricant:
- Nexperia
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 170-5424
- Référence fabricant:
- 74LVC573APW,118
- Fabricant:
- Nexperia
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Nexperia | |
| Logic Family | 74LVC | |
| Product Type | Octal D Type Latch | |
| Logic Function | D Type | |
| Latch Mode | Transparent | |
| Number of Bits | 8 | |
| Number of Channels | 8 | |
| Output Type | 3 State | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Package Type | TSSOP | |
| Minimum Supply Voltage | 1.2V | |
| Pin Count | 20 | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Standards/Approvals | No | |
| Series | 74LVC | |
| Length | 6.6mm | |
| Height | 950μm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Nexperia | ||
Logic Family 74LVC | ||
Product Type Octal D Type Latch | ||
Logic Function D Type | ||
Latch Mode Transparent | ||
Number of Bits 8 | ||
Number of Channels 8 | ||
Output Type 3 State | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Package Type TSSOP | ||
Minimum Supply Voltage 1.2V | ||
Pin Count 20 | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Standards/Approvals No | ||
Series 74LVC | ||
Length 6.6mm | ||
Height 950μm | ||
Automotive Standard No | ||
- Pays d'origine :
- CN
The 74LVC573A consists of eight D-type transparent latches, featuring separate D-type inputs for each latch and 3-state true outputs for bus-oriented applications. A Latch Enable (LE) input and an Output Enable (OE) input are common to all internal latches. When LE is HIGH, data at the Dn inputs enters the latches. In this condition, the latches are transparent, that is, a latch output will change each time its corresponding D-input changes.
Mixed 5 V and 3.3 V applications
Save board space
Low cost Interface solutions
Improved signal integrity for complex layouts
Wide supply voltage range
Low propagation delay
Overvoltage tolerant
Source termination
Low input threshold
CMOS low power
Memory controllers
Backplane interfaces
Liens connexes
- Nexperia 74LVC573APW Transparent 20-Pin TSSOP
- Nexperia 74HC573PW Transparent 20-Pin TSSOP-20
- Nexperia 8-Bit Octal D Type Latch 3 State, 20-Pin TSSOP-20
- Nexperia 8-Bit Octal D Type Latch 3 State, 20-Pin SO
- Nexperia 74HC573D Transparent 20-Pin SO
- Nexperia 74HC373PW Transparent 20-Pin TSSOP
- Nexperia 74HCT573PW Transparent 20-Pin TSSOP
- Nexperia 74LVT573PW Transparent D Type 20-Pin TSSOP