Eaton 3-Pole Surface Isolator Switch -, IP65, 190A, 13 kW

Voir la catégorie
Offre groupée disponible

Sous-total (1 unité)*

38,15 €

(TVA exclue)

46,16 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 9 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité
Prix par unité
1 - 438,15 €
5 - 1136,97 €
12 +35,80 €

*Prix donné à titre indicatif

N° de stock RS:
805-5584
Référence fabricant:
172834 P1-25/XM
Fabricant:
Eaton
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Eaton

Number of Poles

3

Product Type

Isolator Switch

Mount Type

Surface

IP Rating

IP65

Electrical Phase

3

Series

P1-25

Switching Current

190A

Auxiliary Contacts Available

Yes

Terminal Type

Screw

Switching AC Voltage

230V ac

Switching DC Voltage

60V dc

Minimum Operating Temperature

-25°C

Padlock Compatibility

No

Switching Power

13kW

Maximum Operating Temperature

50°C

Width

70mm

Length

49mm

Depth

75mm

Hazardous Area Certification

NO

Standards/Approvals

CSA, UL, IEC

Statut RoHS : Exempté

Eaton P1-25/XM


Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained.

• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions are when used as a main switch, maintenance switch or manual override switch

• 3 pole

• Auxiliary contact or neutral conductor must be fitted by the user

• IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Rear mounting

• Features an ambient operating temperature of -25 to +50 °C

• Has a mechanical shock resistance of 15 g

• M4 screw terminal

• Rear mounting

Eaton Non-Fused Switch Disconnectors - P1 Series Isolators


The P1 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.

With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.

With the metal extension shaft accessories, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.

• Performs local isolation, manual override & safety switch functions

• P1 Series fit a standard front plate of 45 x 45 mm

• For spare rotary thumb stick (black) see stock no. 176-9759

What is the difference between a fused switch disconnector and a non-fused switch disconnector?


Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller

Liens connexes