Eaton 3-Pole Surface Mount Isolator Switch -, IP65, 190A, 13 kW
- N° de stock RS:
- 330-7944
- Numéro d'article Distrelec:
- 135-11-928
- Référence fabricant:
- 207293 P1-25/I2/SVB
- Fabricant:
- Eaton
Offre groupée disponible
Sous-total (1 unité)*
58,72 €
(TVA exclue)
71,05 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 7 unité(s) prête(s) à être expédiée(s)
- Plus 74 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 9 unité(s) expédiée(s) à partir du 06 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 58,72 € |
| 5 - 11 | 56,93 € |
| 12 + | 55,10 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 330-7944
- Numéro d'article Distrelec:
- 135-11-928
- Référence fabricant:
- 207293 P1-25/I2/SVB
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Product Type | Isolator Switch | |
| Number of Poles | 3 | |
| Mount Type | Surface Mount | |
| IP Rating | IP65 | |
| Electrical Phase | 3 | |
| Handle Colour | Red | |
| Series | P1-25 | |
| Auxiliary Contacts Available | No | |
| Switching Current | 190A | |
| Terminal Type | Screw | |
| Padlock Compatibility | No | |
| Minimum Operating Temperature | -25°C | |
| Switching Power | 13kW | |
| Switching DC Voltage | 120V dc | |
| Switching AC Voltage | 230V ac | |
| Maximum Operating Temperature | 40°C | |
| Standards/Approvals | IEC, CSA, UL | |
| Width | 100mm | |
| Hazardous Area Certification | NO | |
| Length | 180mm | |
| Depth | 115mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Product Type Isolator Switch | ||
Number of Poles 3 | ||
Mount Type Surface Mount | ||
IP Rating IP65 | ||
Electrical Phase 3 | ||
Handle Colour Red | ||
Series P1-25 | ||
Auxiliary Contacts Available No | ||
Switching Current 190A | ||
Terminal Type Screw | ||
Padlock Compatibility No | ||
Minimum Operating Temperature -25°C | ||
Switching Power 13kW | ||
Switching DC Voltage 120V dc | ||
Switching AC Voltage 230V ac | ||
Maximum Operating Temperature 40°C | ||
Standards/Approvals IEC, CSA, UL | ||
Width 100mm | ||
Hazardous Area Certification NO | ||
Length 180mm | ||
Depth 115mm | ||
Statut RoHS : Exempté
Eaton Isolator Switch, Surface Mounting, 3 Poles - P1-25 Series - 207293 P1-25/I2/SVB
Use this 3-pole isolator switch from Eaton to safely shut down part of a circuit. It can function as a main switch, an emergency stop or a manual override, ensuring workers remain safe and sound while carrying out servicing and maintenance. To disconnect the power supply, rotate the red handle to the 'off' position. Then, to make sure it stays there, the yellow locking ring features three holes that you can insert padlocks into. This is a non-fused isolator, so to reconnect it you just turn the dial back to 'on'.
Features & Benefits
• IP65-rated casing keeps out dust and moisture for a long service life in tough industrial environments
• Compact size of 180 (L) x 100 (W) x 115mm (D), so it doesn't add unnecessary bulk to your setup
• Operating temperature range of -25°C to +50°C, meaning it copes well in challenging conditions
How do I connect the isolator switch to my system?
Mount the switch on a wall or other surface using the two screw fixings on the black casing. There are four M25 knockouts for wiring it into your appliance, two each at the top and bottom, so you can choose which suits you best.
Note
Eaton formerly known as Moeller
Liens connexes
- Eaton 3-Pole Surface Isolator Switch - 190 A, 13 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 190 A, 13 kW
- Eaton 3-Pole Panel Mount Isolator Switch - 190 A, 13 kW
- Eaton 3-Pole Surface Isolator Switch - 25 A, 13 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 630 A, 13 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 25 A, 13 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 24 A, 13 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 13 kW