ABB 4-Pole DIN Rail Isolator Switch -, IP65, 32A, 1.6 W
- N° de stock RS:
- 192-0866
- Référence fabricant:
- 1SCA022401R4590
- Fabricant:
- ABB
Sous-total (1 unité)*
154,53 €
(TVA exclue)
186,98 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 1 unité(s) expédiée(s) à partir du 12 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 154,53 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 192-0866
- Référence fabricant:
- 1SCA022401R4590
- Fabricant:
- ABB
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | ABB | |
| Number of Poles | 4 | |
| Product Type | Isolator Switch | |
| Mount Type | DIN Rail | |
| IP Rating | IP65 | |
| Electrical Phase | 4 | |
| Handle Colour | Black | |
| Auxiliary Contacts Available | Yes | |
| Switching Current | 32A | |
| Terminal Type | Screw | |
| Series | OTP | |
| Switching AC Voltage | 690V ac | |
| Padlock Compatibility | Yes | |
| Switching Power | 1.6W | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | 70°C | |
| Depth | 150mm | |
| Standards/Approvals | RoHS, CE | |
| Width | 60mm | |
| Hazardous Area Certification | No | |
| Length | 130mm | |
| Sélectionner tout | ||
|---|---|---|
Marque ABB | ||
Number of Poles 4 | ||
Product Type Isolator Switch | ||
Mount Type DIN Rail | ||
IP Rating IP65 | ||
Electrical Phase 4 | ||
Handle Colour Black | ||
Auxiliary Contacts Available Yes | ||
Switching Current 32A | ||
Terminal Type Screw | ||
Series OTP | ||
Switching AC Voltage 690V ac | ||
Padlock Compatibility Yes | ||
Switching Power 1.6W | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature 70°C | ||
Depth 150mm | ||
Standards/Approvals RoHS, CE | ||
Width 60mm | ||
Hazardous Area Certification No | ||
Length 130mm | ||
- Pays d'origine :
- FI
The enclosure in the OTP series is using a rigid glass reinforced polycarbonate enclosure. The enclosure is UV protected, protected against low-pressure water jets, and hence built for outdoor and indoor use. The cable entries are threaded and have knock out holes for 2 parallel cables and one control cable, both from top and bottom. The handle is pad lockable and made for three padlocks. The cover is interlocked. The interlocking can be by-passed, for thermographic etc. The switch is made for 5 wire system, and have a fixed neutral terminal and PE terminal.
Liens connexes
- ABB 2-Pole DIN Rail Isolator Switch - IP40, 32A
- ABB 4-Pole DIN Rail Isolator Switch - 32A
- ABB 3-Pole DIN Rail Isolator Switch - 32A
- Socomec 1-Pole DIN Rail Isolator Switch - 32A, 15 kW
- ABB 3-Pole DIN Rail Isolator Switch - 16A
- ABB 4-Pole DIN Rail Isolator Switch - 16A
- ABB 3-Pole DIN Rail Isolator Switch - 32A, 3.85 W
- ABB 1-Pole DIN Rail Isolator Switch - IP20, 32A