Eaton 6-Pole Surface Mount Isolator Switch -, IP65, 100A, 5.5 kW
- N° de stock RS:
- 103-8458
- Référence fabricant:
- 207159 T0-3-8342/I1/SVB
- Fabricant:
- Eaton
Sous-total (1 unité)*
71,26 €
(TVA exclue)
86,22 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 10 unité(s) prête(s) à être expédiée(s)
- Plus 72 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 71,26 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 103-8458
- Référence fabricant:
- 207159 T0-3-8342/I1/SVB
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Number of Poles | 6 | |
| Product Type | Isolator Switch | |
| Mount Type | Surface Mount | |
| IP Rating | IP65 | |
| Electrical Phase | 3, 1 | |
| Handle Colour | Red | |
| Series | T0-3 | |
| Switching Current | 100A | |
| Terminal Type | Screw | |
| Auxiliary Contacts Available | Yes | |
| Padlock Compatibility | No | |
| Switching Power | 5.5kW | |
| Minimum Operating Temperature | -25°C | |
| Switching AC Voltage | 230V ac | |
| Switching DC Voltage | 60V dc | |
| Maximum Operating Temperature | 50°C | |
| Hazardous Area Certification | No | |
| Depth | 120mm | |
| Length | 80mm | |
| Width | 122mm | |
| Standards/Approvals | IEC, UL, CSA | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Number of Poles 6 | ||
Product Type Isolator Switch | ||
Mount Type Surface Mount | ||
IP Rating IP65 | ||
Electrical Phase 3, 1 | ||
Handle Colour Red | ||
Series T0-3 | ||
Switching Current 100A | ||
Terminal Type Screw | ||
Auxiliary Contacts Available Yes | ||
Padlock Compatibility No | ||
Switching Power 5.5kW | ||
Minimum Operating Temperature -25°C | ||
Switching AC Voltage 230V ac | ||
Switching DC Voltage 60V dc | ||
Maximum Operating Temperature 50°C | ||
Hazardous Area Certification No | ||
Depth 120mm | ||
Length 80mm | ||
Width 122mm | ||
Standards/Approvals IEC, UL, CSA | ||
- Pays d'origine :
- GB
Eaton Isolator Switch, Accepts Padlocks, 15g Mechanical Shock Resistance - T0-3 Series - 207159 T0-3-8342/I1/SVB
This isolator switch from Eaton lets you safely power down an isolated part of a circuit when performing critical service functions on your industrial machinery. As it comes with a locking ring, you can padlock the red rotary actuator to the fixed outer yellow ring to keep the switch in an 'off' position for reassurance that you're safe to work. An IP65 rating means you can trust it withstands dust and low-pressure jets of water, so it's a practical choice for safety switch applications in harsh settings. Compact dimensions of 80 (L) x 137 (W) x 130mm (D) and handy pre-drilled mounting holes make it easy to install in your industrial automation and control devices.
Features & Benefits
• Rated impulse withstand voltage of 6kV, so protects you and your equipment in case of overvoltage surges
• Operating temperature range from -25°C to +40°C for compatibility with challenging climates
• Short-circuit protection reduces the risk of harm from excess currents
What type of isolating mechanism does this switch use?
As this is a non-fused isolator switch, it has a rotary cam switch that disconnects your circuits and safely stops the power. This means you can easily reset it and won't need to replace any fuses for the device to work again.
Note
Eaton formerly known as Moeller
Liens connexes
- Eaton 6-Pole Panel Mount Isolator Switch - 100A, 5.5 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 100A, 5.5 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 20A, 5.5 kW
- Eaton 6-Pole Surface Mount Isolator Switch - 100A, 5.5 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 5.5 kW
- Eaton 3-Pole Panel Mount Isolator Switch - 100A, 5.5 kW
- Eaton 1-Pole Surface Mount Isolator Switch - 20A, 5.5 kW
- Eaton 4-Pole Surface Mount Isolator Switch - 20A, 5.5 kW