Eaton 3-Pole Surface Mount Isolator Switch -, IP65, 100A, 5.5 kW
- N° de stock RS:
- 103-8456
- Référence fabricant:
- 207153 T0-3-15680/I1/SVB
- Fabricant:
- Eaton
Sous-total (1 unité)*
66,92 €
(TVA exclue)
80,97 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s)
- Plus 70 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 66,92 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 103-8456
- Référence fabricant:
- 207153 T0-3-15680/I1/SVB
- Fabricant:
- Eaton
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Eaton | |
| Product Type | Isolator Switch | |
| Number of Poles | 3 | |
| Mount Type | Surface Mount | |
| IP Rating | IP65 | |
| Electrical Phase | 3, 1 | |
| Handle Colour | Red | |
| Switching Current | 100A | |
| Series | T0-3 | |
| Auxiliary Contacts Available | Yes | |
| Terminal Type | Screw | |
| Minimum Operating Temperature | -25°C | |
| Switching DC Voltage | 60V dc | |
| Padlock Compatibility | No | |
| Switching AC Voltage | 230V ac | |
| Switching Power | 5.5kW | |
| Maximum Operating Temperature | 50°C | |
| Length | 80mm | |
| Hazardous Area Certification | No | |
| Standards/Approvals | CSA, UL, IEC | |
| Depth | 120mm | |
| Width | 122mm | |
| Sélectionner tout | ||
|---|---|---|
Marque Eaton | ||
Product Type Isolator Switch | ||
Number of Poles 3 | ||
Mount Type Surface Mount | ||
IP Rating IP65 | ||
Electrical Phase 3, 1 | ||
Handle Colour Red | ||
Switching Current 100A | ||
Series T0-3 | ||
Auxiliary Contacts Available Yes | ||
Terminal Type Screw | ||
Minimum Operating Temperature -25°C | ||
Switching DC Voltage 60V dc | ||
Padlock Compatibility No | ||
Switching AC Voltage 230V ac | ||
Switching Power 5.5kW | ||
Maximum Operating Temperature 50°C | ||
Length 80mm | ||
Hazardous Area Certification No | ||
Standards/Approvals CSA, UL, IEC | ||
Depth 120mm | ||
Width 122mm | ||
- Pays d'origine :
- GB
Eaton Isolator Switch, 3 Poles, Single Throw - T0-3 Series - 207153 T0-3-15680/I1/SVB
Want to carry out maintenance on a circuit without shutting off your whole system? This isolator switch from Eaton makes powering down part of the circuit a breeze, letting you work on it safely while the rest of your setup continues as normal. As a triple-pole, single-throw switch, it's suitable for switching the three-phase loads found in commercial and industrial premises such as factories and workshops. The rotary handle is coloured red so you can spot it easily should you need to break the circuit quickly in an emergency.
Features & Benefits
• Screw terminals let you make secure connections quickly
• Operating temperature range of -25°C to +50°C makes it suitable for use in harsh industrial environments
• IP65 rating means it's dust-tight and stands up to low-pressure water jets
• Can be padlocked to prevent the circuit from being accidentally powered up before maintenance is complete
Is this a fused switch disconnector?
No, this is a non-fused isolator that uses the rotary switch to disconnect and de-energise the circuit. This means that when you're ready to power up again, you can simply turn the handle with no need to replace any parts.
Note
Eaton formerly known as Moeller
Liens connexes
- Eaton 3-Pole Surface Mount Isolator Switch - 100A, 5.5 kW
- Eaton 6-Pole Surface Mount Isolator Switch - 100A, 5.5 kW
- Eaton 3-Pole Surface Non-Fused Isolator Switch - 20A, 5.5 kW
- Eaton 3-Pole Surface Isolator Switch - 20A, 5.5 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 5.5 kW
- Eaton 3-Pole Panel Mount Isolator Switch - 100A, 5.5 kW
- Eaton 6-Pole Panel Mount Isolator Switch - 100A, 5.5 kW
- Eaton 3-Pole Surface Mount Isolator Switch - 20A, 5.5 kW