TE Connectivity Insertion & Extraction Tool, AMPLIMITE Series, Crimp Contact, Contact size 20
- N° de stock RS:
- 301-8414
- Numéro d'article Distrelec:
- 180-49-322
- Référence fabricant:
- 91067-2
- Fabricant:
- TE Connectivity
Offre groupée disponible
Sous-total (1 unité)*
17,95 €
(TVA exclue)
21,72 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 49 unité(s) prête(s) à être expédiée(s)
- Plus 345 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 24 | 17,95 € |
| 25 - 74 | 15,37 € |
| 75 - 199 | 14,95 € |
| 200 - 399 | 14,56 € |
| 400 + | 14,18 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 301-8414
- Numéro d'article Distrelec:
- 180-49-322
- Référence fabricant:
- 91067-2
- Fabricant:
- TE Connectivity
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | TE Connectivity | |
| Contact Type | Crimp | |
| Tool Type | Extraction Tool | |
| Contact Size | 20 | |
| Series | AMPLIMITE | |
| Overall Length | 100.33 mm | |
| Sélectionner tout | ||
|---|---|---|
Marque TE Connectivity | ||
Contact Type Crimp | ||
Tool Type Extraction Tool | ||
Contact Size 20 | ||
Series AMPLIMITE | ||
Overall Length 100.33 mm | ||
Non conforme
- Pays d'origine :
- MX
Crimp contacts for Sub-D
Size 20 standard contacts for use in Sub-D enclosures from the HD series.
Supplied in bulk in packs of 500.
A crimping tool and a pusher tool are also available.
Supplied in bulk in packs of 500.
A crimping tool and a pusher tool are also available.
Crimp contacts for Sub-D
The TE Connectivity 91067-2 is an insertion/extraction tool. This tool is for HD-20, It is colour coded to determine the insertion/extraction tool.
This tool can be used for both insertion and extraction of crimp contacts, allowing you to easily insert or extract a terminal from a housing, without causing any damage. With a combination of both functions, you don’t have to worry about changing the tip type for the different operations, saving you valuable time.
Features
• Insertion and extraction
• Compatible contacts: HD-20
• High quality
How to replace the tip:
To replace an insertion and extraction tip, you will need to firstly remove the old tip using the hex wrench provided with the tool. Insert the plug into the wide end of the tip and place it into the tool handle. The handle comes with a hex wrench which tightens and secures the tip into the handle. Then you’re ready to go.
This tool can be used for both insertion and extraction of crimp contacts, allowing you to easily insert or extract a terminal from a housing, without causing any damage. With a combination of both functions, you don’t have to worry about changing the tip type for the different operations, saving you valuable time.
Features
• Insertion and extraction
• Compatible contacts: HD-20
• High quality
How to replace the tip:
To replace an insertion and extraction tip, you will need to firstly remove the old tip using the hex wrench provided with the tool. Insert the plug into the wide end of the tip and place it into the tool handle. The handle comes with a hex wrench which tightens and secures the tip into the handle. Then you’re ready to go.
TE Connectivity AMPLIMITE D-Subminiature Connectors
Liens connexes
- TE Connectivity Insertion & Extraction Tool Pin Contact 22
- TE Connectivity Insertion & Extraction Tool
- TE Connectivity, AMPLIMITE HDE-20 Extraction & Insertion Tool
- Hirschmann Insertion & Extraction Tool Crimp Contact, Contact size 1.6mm
- TE Connectivity Insertion & Extraction Tool, AMPLIMITE HDE Series
- Facom Insertion & Extraction Tool, Contact size 3/8in
- DMC Crimp Extraction Tool Contact size 20
- Facom Insertion & Extraction Tool, Contact size 1/2in