RS PRO Heating Element, 150 W, 240 V ac
- N° de stock RS:
- 790-4870
- Fabricant:
- RS PRO
Visuel non contractuel
Offre groupée disponible
Sous-total (1 unité)*
63,23 €
(TVA exclue)
76,51 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 2 | 63,23 € |
| 3 + | 61,34 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 790-4870
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Element Type | Band Heater | |
| Power Rating | 150 W | |
| Supply Voltage | 240 V ac | |
| Width | 1.5in | |
| Diameter | 38 mm | |
| Peak Temperature | +300°C | |
| Lead Length | 1m | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Element Type Band Heater | ||
Power Rating 150 W | ||
Supply Voltage 240 V ac | ||
Width 1.5in | ||
Diameter 38 mm | ||
Peak Temperature +300°C | ||
Lead Length 1m | ||
- Pays d'origine :
- CN
Sealed Mica Nozzle Heaters
These nozzle heaters are hermetically sealed for liquid plastic within the manufacturing process. These types of heaters are used to give long life where normal mica heaters cannot last as long due to process leakages.
These heaters are typically used on injection moulding machines, extruders, dies, moulds and process machinery.
These heaters are typically used on injection moulding machines, extruders, dies, moulds and process machinery.
Constructed by winding resistance wire
Insulated and terminal connections fitted
Encased in brass casing which gives good mechanical strength and protection
Supply voltage is 230 V
Up to 300 °C
Cable length is 1m
Available in various sizes
Insulated and terminal connections fitted
Encased in brass casing which gives good mechanical strength and protection
Supply voltage is 230 V
Up to 300 °C
Cable length is 1m
Available in various sizes
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.