RS PRO Heating Element, 1.5in, 20 W, 120 V ac
- N° de stock RS:
- 860-6805
- Fabricant:
- RS PRO
Offre groupée disponible
Sous-total (1 unité)*
14,08 €
(TVA exclue)
17,04 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 32 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 40 unité(s) expédiée(s) à partir du 18 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 14,08 € |
| 5 - 11 | 13,50 € |
| 12 + | 12,93 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 860-6805
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Element Type | Cartridge Heater | |
| Power Rating | 20 W | |
| Supply Voltage | 120 V ac | |
| Length | 1.5in | |
| Diameter | 1/4 in | |
| Lead Length | 10in | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Element Type Cartridge Heater | ||
Power Rating 20 W | ||
Supply Voltage 120 V ac | ||
Length 1.5in | ||
Diameter 1/4 in | ||
Lead Length 10in | ||
- Pays d'origine :
- IN
RS PRO Heating Element, 8 in, 650 W, 220 V AC
Use this heating element from RS PRO to apply targeted heat to metal solids. The built-in leads are made to resist extreme temperatures of up to +450°C, while the robust ceramic cap makes the unit resistant to impact and vibration.
You can install the heating element by inserting it into a drilled hole with a snug fit to maximise heat transfer. The deep holes in the heater's end cap ensure that the leads don't fray when bent, keeping the wires performing optimally for a long time. The small size of the heater makes it ideal for use in compact spaces.
The heater is designed for use in industrial settings where localised heating is required. To prevent overheating, it's strongly recommended to use this unit with a temperature sensor and control system.
You can install the heating element by inserting it into a drilled hole with a snug fit to maximise heat transfer. The deep holes in the heater's end cap ensure that the leads don't fray when bent, keeping the wires performing optimally for a long time. The small size of the heater makes it ideal for use in compact spaces.
The heater is designed for use in industrial settings where localised heating is required. To prevent overheating, it's strongly recommended to use this unit with a temperature sensor and control system.
Features and Benefits
• Diameter of 1/2 in
• Cartridge heater element type
• Lead length of 10 in
• Length of 8 in
• Power rating of 650 W
• Supply voltage of 220 V AC
• Cartridge heater element type
• Lead length of 10 in
• Length of 8 in
• Power rating of 650 W
• Supply voltage of 220 V AC