Bahco 300 mm, 14 TPI Hardpoint
- N° de stock RS:
- 470-371
- Référence fabricant:
- NP-12-TEN
- Fabricant:
- Bahco
Sous-total (1 unité)*
21,18 €
(TVA exclue)
25,63 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 10 unité(s) expédiée(s) à partir du 26 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 21,18 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 470-371
- Référence fabricant:
- NP-12-TEN
- Fabricant:
- Bahco
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Bahco | |
| Saw Blade Type | Hardpoint | |
| Blade Length | 300mm | |
| Product Type | Hand Saw | |
| Teeth per Inch | 14 | |
| Blade Material | Metal | |
| Blade Thickness | 750μm | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Bahco | ||
Saw Blade Type Hardpoint | ||
Blade Length 300mm | ||
Product Type Hand Saw | ||
Teeth per Inch 14 | ||
Blade Material Metal | ||
Blade Thickness 750μm | ||
Standards/Approvals No | ||
Statut RoHS : Exempté
- Pays d'origine :
- SE
Bahco Hand Saw, 300mm Blade Length, 0.75mm Blade Thickness - NP-12-TEN
This hand saw is a manual cutting tool designed for precision woodworking tasks where control and fine cuts are required. It operates with a thin metal blade fitted with hardpoint teeth to maintain cutting performance in mixed materials. The tool is intended for tradespeople and experienced hobbyists working on detailed joinery and trimming operations.
Features and Benefits:
• Hardpoint teeth maintain edge integrity during repeated cuts
• 14 teeth per inch provide fine, controlled cutting action
• Metal blade offers consistent stiffness for straight cuts
• 0.75mm blade thickness reduces kerf for minimal material waste
• 300mm blade length balances reach with manoeuvrability
• 14 teeth per inch provide fine, controlled cutting action
• Metal blade offers consistent stiffness for straight cuts
• 0.75mm blade thickness reduces kerf for minimal material waste
• 300mm blade length balances reach with manoeuvrability
Applications
• Suitable for detailed carpentry and trim work
• Ideal for cutting thin timber and softwood components
• Used with mitre jigs for fine-angle crosscuts
• Can be used for cabinetmaking and finishing tasks
• Suitable for workshop settings requiring precise hand sawing
• Ideal for cutting thin timber and softwood components
• Used with mitre jigs for fine-angle crosscuts
• Can be used for cabinetmaking and finishing tasks
• Suitable for workshop settings requiring precise hand sawing
How does the blade construction affect cutting durability?
The hardpoint configuration concentrates wear-resistant material at the tooth tips to preserve edge life under frequent use.
What cutting feel should be expected with this blade thickness?
At 0.75mm the blade produces a narrow cut profile, enabling finer control and reduced material removal during passes.
Which tooth spacing suits finishing over rough cutting?
The 14TPI arrangement delivers a finer tooth pitch that favours smoother finishes rather than Rapid stock removal.
How does blade length influence handling in confined spaces?
A 300mm blade provides an intermediate reach that permits controlled strokes without excessive overhang in tight work areas.