Honeywell Hall Effect Sensor, Digital Output, 3.8 → 30 V dc
- N° de stock RS:
- 169-7671
- Référence fabricant:
- SR15C-A3
- Fabricant:
- Honeywell
Sous-total (1 sachet de 100 unités)*
1 821,20 €
(TVA exclue)
2 203,70 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- 100 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Le Sachet* |
|---|---|---|
| 100 + | 18,212 € | 1 821,20 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 169-7671
- Référence fabricant:
- SR15C-A3
- Fabricant:
- Honeywell
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Honeywell | |
| Output Type | Digital | |
| Supply Voltage | 3.8 → 30 V dc | |
| Terminal Type | Wire Lead | |
| Switching Current | 20 mA | |
| Length | 7.6mm | |
| Width | 20.3mm | |
| Depth | 5.1mm | |
| Dimensions | 7.6 x 20.3 x 5.1 mm | |
| Maximum Operating Temperature | +150°C | |
| Minimum Operating Temperature | -40°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Honeywell | ||
Output Type Digital | ||
Supply Voltage 3.8 → 30 V dc | ||
Terminal Type Wire Lead | ||
Switching Current 20 mA | ||
Length 7.6mm | ||
Width 20.3mm | ||
Depth 5.1mm | ||
Dimensions 7.6 x 20.3 x 5.1 mm | ||
Maximum Operating Temperature +150°C | ||
Minimum Operating Temperature -40°C | ||
Statut RoHS : Exempté
- Pays d'origine :
- MX
SR13 and SR15 series Hall effect sensors
Hall effect sensors in plastic casing with wires.
Flat or quick fit snap-in casing for rapid assembly.
Used in association with a magnet.
Application in various types of detection, low cost.
Flat or quick fit snap-in casing for rapid assembly.
Used in association with a magnet.
Application in various types of detection, low cost.
Liens connexes
- Honeywell Hall Effect Sensor 3.8 → 30 V dc
- Honeywell Hall Effect Sensor 3.8 → 30 V dc, 30V
- Honeywell Through Hole Hall Effect Sensor 3.8 → 30 V dc, 30V
- Honeywell Digital Hall Effect Sensor switching current 20 mA supply voltage 3.8 → 30 V dc
- Honeywell Hall Effect Sensor 6.6 → 12.6 V dc
- Honeywell Hall Effect Sensor -1 → +25 V dc, 25V
- Honeywell Flange Mount Hall Effect Sensor 10 → 30 V dc 180 °
- Honeywell Digital Hall Effect Sensor switching current 1 mA supply voltage 6.6 → 12.6 V dc
