Eaton 25 A 6.3 x 32 mm, Bolt Mount Bolt Down Fuse Block, 300 V ac/dc

Voir l’ensemble des Fuse Blocks
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
N° de stock RS:
852-7219
Référence fabricant:
S-8002-1-R
Fabricant:
Eaton
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Eaton

Fuse Type

Bolt Down

Product Type

Fuse Block

Fuse Size

6.3 x 32 mm

Number of Fuses

1

Current Rating

25 A

Voltage

300 V ac/dc

Minimum Operating Temperature

0°C

Mount Type

Bolt Mount

Maximum Operating Temperature

60°C

Body Material

Thermoplastic

Standards/Approvals

RoHS. UL E14853, CSA 47235

For Use With

6.3 x 32 mm Fuse

Dielectric Strength

600V

Clip Material

Spring Bronze

Series

S-8000

Holder Terminal Type

Solder

Pays d'origine :
US

Cooper Bussmann Fuse Block - S-8000 Series


The S-8000 Series from Cooper Bussmann offers a professional range of Fuse Blocks from single pole to 12 pole units.

Tight cluster mounting

Single pole to 12 pole units

300 Volt Rating

Choice of solder, quick connect (QC) or screw terminals

UL Recognised

Panel Mounting


CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.

Note

Eaton formerly known as Bussmann

Liens connexes

Recently viewed