Pepperl + Fuchs LFL2 Series Horizontal Float Switch, 5 m Cable, Direct Load, 250 V ac ac Max, 150 V dc dc Max
- N° de stock RS:
- 350-2082
- Numéro d'article Distrelec:
- 303-99-696
- Référence fabricant:
- LFL2-BK-U-PUR5
- Fabricant:
- Pepperl + Fuchs
Sous-total (1 unité)*
86,99 €
(TVA exclue)
105,26 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 7 unité(s) expédiée(s) à partir du 25 septembre 2026
- Plus 31 unité(s) expédiée(s) à partir du 25 septembre 2026
- Plus 8 unité(s) expédiée(s) à partir du 02 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 86,99 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 350-2082
- Numéro d'article Distrelec:
- 303-99-696
- Référence fabricant:
- LFL2-BK-U-PUR5
- Fabricant:
- Pepperl + Fuchs
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Pepperl + Fuchs | |
| Product Type | Float Switch | |
| Mount Type | Horizontal | |
| Switch Output | Direct Load | |
| Housing Material | Polypropylene | |
| Cable Length | 5m | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 85°C | |
| Maximum AC Voltage | 250V ac | |
| Maximum DC Voltage | 150V dc | |
| Maximum Current | 3A | |
| Maximum Pressure | 2bar | |
| Standards/Approvals | EN, CE | |
| Hazardous Area Certification | No | |
| Series | LFL2 | |
| Sélectionner tout | ||
|---|---|---|
Marque Pepperl + Fuchs | ||
Product Type Float Switch | ||
Mount Type Horizontal | ||
Switch Output Direct Load | ||
Housing Material Polypropylene | ||
Cable Length 5m | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 85°C | ||
Maximum AC Voltage 250V ac | ||
Maximum DC Voltage 150V dc | ||
Maximum Current 3A | ||
Maximum Pressure 2bar | ||
Standards/Approvals EN, CE | ||
Hazardous Area Certification No | ||
Series LFL2 | ||
Statut RoHS : Exempté
Pepperl + Fuchs Float Switch
The Pepperl + Fuchs microswitch (changeover contact) integrated with a PP float. It is activated in the event of deviations from the horizontal position. The switching ball in the float moves along an axis and activates the microswitch. This device can be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements. It has a supply voltage of 250VAC/150VDC.
Features and Benefits
It uses PUR cable material
Switch element: Micro switch, mercury-free
Limit value detection for fluids
Sleeve design: Small diameter, mounting through G1 tap hole possible
Ball design: High buoyancy
Density sleeve design: ≥ 0.8 g/cm3 and ball design: ≥ 0.6 g/cm3
Switching is started by the rocking motion of the sensor
It is ideally suited to low density liquids
The switch element is mercury free
The float switch is small in diameter, allowing users to fit into tap holes as small as G1
Density: ≥0.6g/cm3
It has 5m cable length
Certifications
IP68 rated
EN 50178
EN 60529
EN 60947-5-2
EN 60947-5-2 A1
CE certified
Liens connexes
- Pepperl + Fuchs LFL2 Series Horizontal Float Switch Direct Load 150 V dc dc Max
- Pepperl + Fuchs Horizontal Float Switch NAMUR
- RS PRO CSSF24 Series Horizontal Float Switch Direct Load 300 V dc dc Max
- Cynergy3 RSF10 Series Direct Nitrile Rubber (NBR) Float Switch Direct Load 120 V dc dc
- Cynergy3 FFSMC Series Cable Float Switch Direct Load 110 V dc dc Max
- Cynergy3 SLP Series Vertical Float Switch Direct Load 250 V dc dc Max
- Cynergy3 MS Series Cable Float Switch Direct Load 24 V dc dc Max
- Gems Sensors Horizontal 0.3 m Cable 115 V ac ac Max, 30 V dc dc Max