Sensata / Cynergy3 RSF70 Series Horizontal Viton Float Switch, 500 mm Cable, NO/NC, 240 V ac Max, 120 V dc Max

Voir l’ensemble des Float Switches

Sous-total (1 unité)*

28,29 €

(TVA exclue)

34,23 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Commandes ci-dessous 75,00 € coût (TVA exclue) 5,95 €.
En stock
  • 81 unité(s) prête(s) à être expédiée(s)
  • Plus 48 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 220 unité(s) expédiée(s) à partir du 20 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +28,29 €

*Prix donné à titre indicatif

N° de stock RS:
288-9322
Numéro d'article Distrelec:
303-99-298
Référence fabricant:
RSF76Y050TV
Fabricant:
Sensata / Cynergy3
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Sensata / Cynergy3

Product Type

Float Switch

Mount Type

Horizontal

Switch Output

NO/NC

Housing Material

Polyvinylidene Sulphide

Cable Length

500mm

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

120°C

Maximum AC Voltage

240V

Maximum DC Voltage

120V

Maximum Current

600mA

Gasket Material

Viton

Standards/Approvals

UL and NSF, WRAS

Series

RSF70

Hazardous Area Certification

No

Pays d'origine :
CN

Sensata Cynergy3 Horizontal External Float Switch, NO/NC, 500 mm - RSF70 Series - RSF76Y050TV


This Sensata Cynergy3 float switch is a simple and reliable way to monitor liquid levels in your system. It's designed to fit through a tank wall from the outside, so it's a good choice for less accessible containers. The switch is simple to install – just insert the switch into a 23 mm diameter hole in your tank, then use the compression seal and backnut to secure it in place. To make it a versatile choice, this switch is suitable for use with most organic and inorganic chemicals and oils. You'll commonly find it used in vending machines, commercial washing machines and evaporator units.

Features and Benefits


• Polyphenylene sulfide body and silicone and Viton gasket for use in challenging chemical applications

• Broad operating temperature range of -10°C to +120°C for use in demanding conditions

• Simple rotation of 180° to set the switch action to normally open (NO) or normally closed (NC) operation

How does this float switch work?


This switch combines a reed switch with a pivoted magnet on a float. The magnet causes the reed switch to close or open at a specific fluid level.

Cynergy3 Horizontal Float Switches


Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

WRAS approval explained


WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

What materials can you choose from?


• Nylon

• Polypropylene

• Polypropylene Sulfide (PPS)

Features and Benefits


• Operating temperature: -10 °C to +120 °C

• N/O or N/C Switch output

• Switch action may be reversed by rotating the switch through 180º

• Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile

• Flying Lead

• M12 plug connection

• Internal & external fitting inside a tank

• UL recognised

Typical Applications


These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Note

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.

Liens connexes