Sensata / Cynergy3 RSF50 Series Vertical Nitrile Rubber (NBR) Float Switch, 1 m Cable, NO/NC, 240 V ac Max, 120 V dc Max

Voir l’ensemble des Float Switches

Sous-total (1 unité)*

42,34 €

(TVA exclue)

51,23 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 159 unité(s) expédiée(s) à partir du 09 février 2026
  • Plus 50 unité(s) expédiée(s) à partir du 09 février 2026
  • Plus 105 unité(s) expédiée(s) à partir du 16 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +42,34 €

*Prix donné à titre indicatif

N° de stock RS:
845-998
Numéro d'article Distrelec:
304-02-370
Référence fabricant:
RSF54V100MC
Fabricant:
Sensata / Cynergy3
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Sensata / Cynergy3

Product Type

Float Switch

Mount Type

Vertical

Switch Output

NO/NC

Housing Material

Polypropylene

Cable Length

1m

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

100°C

Maximum AC Voltage

240V

Maximum DC Voltage

120V

Maximum Current

600mA

Gasket Material

Nitrile Rubber (NBR)

Standards/Approvals

WRAS and NSF

Hazardous Area Certification

No

Series

RSF50

Pays d'origine :
CN

Sensata Cynergy3 Vertical Float Switch, NO/NC, 1 m - RSF50 Series - RSF54V100MC


To prevent overfilling in your tanks, containers and other receptacles, monitor liquid levels with this float switch from Sensata Cynergy3. It's designed to be mounted vertically by fitting it through the top or bottom of the tank, making it ideal for containers where there's no side access. The float switch keeps the level of water in your tank between a must-close level of 15 mm and a must-open level of 26 mm. It's a reliable method to monitor and automatically control liquid levels using a pump.

Features and Benefits


• Operates in normally open (NO) and normally closed (NC) positions for versatile use

• Wide operating temperature range of -20°C to +100°C for use in demanding environments

• Suitable for use with most liquids, making it a reliable choice for industrial applications

What material is this float switch made from?


This float switch is made from robust polypropylene to ensure long-lasting performance. It's resistant to chemicals and corrosion, making it safe for use with acids, alkalis, detergents and oils. This makes it a popular choice for printing systems, food processing equipment and vending machines.

Cynergy3 RSF50 Series Float Switches


Cynergy3 RSF50 float switches are compact devices suitable for vending machines printing system and chemical dosing equipment, for example. RSF50 float switches are vertically mounted and feature a single switch.

There is a range of different material options available within the RSF50 series so you will be sure to find a suitable float switch for more commonly used liquids.

The direction of the switch can be reversed by firstly removing the float, inverting the switch and re-fitting it to the stem.

Within the series there are 5 ranges:

RSF53 (black) - Nylon

RSF54 (opaque) - Polypropylene (WRAS approved)

RSF56 (grey) - Polyphenylene Sulphide (PPS)

RSF57 (green) - Polyvinylidene Fluoride (PVDF)

RSF58 (white) - Polypropylene (UL approved)

Note - the different ranges feature other differences. Please refer to the Datasheet for more information on technical specifications.

What contact types are there?

The RSF50 float switches can be configured for N/O (Normally Open) or N/C (Normally Closed) operation.

What mounting thread does it have?

RSF50 float switches have either M12 or 1/8” NPT mounting thread. This is depicted by the last part of the part number. If it ends in “B” or “C”, it is an M12. If it ends in “1/8” it is 1/8” NPT.

Note

Part numbers ending in '1/8' have a 1/8"NPT mounting thread
Part numbers ending in 'C' have an M12 mounting thread

Warning

The cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the Vertical type the mounting thread and cable entry must be above the highest level of the liquid.

Supplied with

epoxy sealed leadouts

Liens connexes