Festo 1/2 in FRL Assembly, Manual Drain, 40 μm Filtration Size Integrated Pressure Gauge, 530222
- N° de stock RS:
- 288-2819
- Référence fabricant:
- MSB6-1/2:J1D1A1-WP
- Fabricant:
- Festo
Sous-total (1 unité)*
387,47 €
(TVA exclue)
468,84 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 16 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 387,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 288-2819
- Référence fabricant:
- MSB6-1/2:J1D1A1-WP
- Fabricant:
- Festo
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Festo | |
| Product Type | FRL Assembly | |
| Port Size | 1/2 in | |
| Integrated Pressure Gauge | Yes | |
| Maximum Flow Rate | 3100L/min | |
| Drain Type | Manual | |
| Connection Thread Standard | G | |
| Series | MS | |
| Filtration Size | 40μm | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 60°C | |
| Maximum Operating Pressure | 18 bar | |
| Standards/Approvals | RoHS | |
| Bowl Material | Polycarbonate | |
| Model Number | 530222 | |
| Sélectionner tout | ||
|---|---|---|
Marque Festo | ||
Product Type FRL Assembly | ||
Port Size 1/2 in | ||
Integrated Pressure Gauge Yes | ||
Maximum Flow Rate 3100L/min | ||
Drain Type Manual | ||
Connection Thread Standard G | ||
Series MS | ||
Filtration Size 40μm | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 60°C | ||
Maximum Operating Pressure 18 bar | ||
Standards/Approvals RoHS | ||
Bowl Material Polycarbonate | ||
Model Number 530222 | ||
- Pays d'origine :
- HU
Festo MS FRL Assembly, 1/2 Port Size, 18 Bar Maximum Operating Pressure - MSB6-1/2:J1D1A1-WP, Numeric Part Number:530222
This FRL assembly conditions compressed Air for industrial pneumatic systems by combining filtration, pressure regulation and lubrication into a single unit. It is designed for integration into control and automation equipment where treated Air is required to maintain actuator and valve performance. The assembly accepts G-thread connections and is suited to systems operating across typical workshop temperatures.
Features and Benefits:
• 3100 L/min maximum flow supports high-demand pneumatic circuits
• 18 bar maximum pressure enables robust system headroom
• 40 μm filtration removes fine particulates to protect downstream components
• Polycarbonate bowl permits Visual fluid and condensate inspection
• Integrated pressure gauge gives immediate system pressure feedback
• Manual drain provides simple condensate evacuation without tools
• 18 bar maximum pressure enables robust system headroom
• 40 μm filtration removes fine particulates to protect downstream components
• Polycarbonate bowl permits Visual fluid and condensate inspection
• Integrated pressure gauge gives immediate system pressure feedback
• Manual drain provides simple condensate evacuation without tools
Applications
• Suitable for upstream Air treatment on industrial automation lines
• Ideal for pneumatic supply to valves and cylinders in assembly plants
• Used with high-flow blow-off and actuated tooling systems
• Can be used for compressed Air preparation in test rigs and labs
• Ideal for pneumatic supply to valves and cylinders in assembly plants
• Used with high-flow blow-off and actuated tooling systems
• Can be used for compressed Air preparation in test rigs and labs
What temperature range can it withstand in continuous service?
The unit is rated to operate between -10°C and 60°C, permitting use in typical indoor and sheltered industrial environments.
How is the unit connected into existing pneumatic piping?
It uses G-standard threaded ports with a 1/2 in port size for direct screw-in installation to compatible fittings.
What particulate size will the filter capture and how does that affect maintenance?
The filter element captures particles down to 40 μm, reducing wear on valves and actuators and extending service intervals for downstream components.
Does the assembly include Visual indication of pressure without additional instrumentation?
Yes, the built-in pressure gauge provides on-unit pressure readout so operators can verify supply pressure at a glance.
Liens connexes
- Festo FRL Assembly 40 μm Filtration Size Integrated Pressure Gauge
- Festo 1/2 in FRL Assembly 40 μm Filtration Size Integrated Pressure Gauge
- Festo FRL Assembly 5 μm Filtration Size Integrated Pressure Gauge
- Festo FRL Assembly 5 μm Filtration Size Integrated Pressure Gauge
- Festo 1/2 in FRL 40 μm Filtration Size Integrated Pressure Gauge
- Festo 1/2 in G FRL 40 μm Filtration Size Integrated Pressure Gauge
- Festo 1/2 in G FRL 40 μm Filtration Size Integrated Pressure Gauge
- Festo 3/8 in G FRL 40 μm Filtration Size Integrated Pressure Gauge