Festo 1/2 in FRL Assembly, Manual Drain, 40 μm Filtration Size Integrated Pressure Gauge

Voir la catégorie

Sous-total (1 unité)*

356,98 €

(TVA exclue)

431,95 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Stocké-e par le fabricant
  • Prêt à être expédié à partir du 01 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +356,98 €

*Prix donné à titre indicatif

N° de stock RS:
288-2816
Référence fabricant:
MSB6-1/2:C3:J120:F12-WP
Fabricant:
Festo
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Festo

Product Type

FRL Assembly

Maximum Flow Rate

5300L/min

Integrated Pressure Gauge

Yes

Drain Type

Manual

Connection Thread Standard

G

Series

MS

Filtration Size

40μm

Minimum Operating Temperature

0°C

Maximum Operating Pressure

18 bar

Maximum Operating Temperature

50°C

Bowl Material

Polycarbonate

Festo MS FRL Assembly, 1/2 Port Size, 18 Bar Maximum Operating Pressure - MSB6-1/2:C3:J120:F12-WP, Numeric Part Number:8042671


This frl assembly is a Compact Air preparation unit designed to condition compressed Air for industrial pneumatic systems. It combines filtration, regulation and lubrication into a single module to support downstream equipment performance in automation and mechanical installations. The unit is built for inline connection using a G-threaded 1/2 port and operates across common workshop temperatures.

Features and Benefits:


• 40μm filtration for contamination reduction and valve protection
• 5300L/min maximum flow to maintain supply for multiple actuators
• Manual drain with polycarbonate bowl for visible condensate removal
• Integrated pressure gauge enabling Rapid system pressure checks
• Maximum operating pressure 18 bar to suit high-pressure pneumatic circuits
• Rated to 50°C maximum operating temperature for warm environments

Applications


• Suitable for supplying pneumatic valves in factory automation
• Ideal for conditioning Air to solenoid valves and actuators
• Used with assembly-line tooling requiring steady flow rates
• Can be used for compressed Air treatment in test rigs and labs
• Used for general plant Air preparation where manual drainage is acceptable

What material is used for the transparent bowl and why is it useful?


The bowl is polycarbonate, offering impact resistance and clear visibility to monitor condensate and particulate without disassembly.

How does the filtration specification affect maintenance intervals?


A 40 Micron filter element captures fine particulates, reducing downstream wear and typically extending service intervals compared with coarser media, though interval length depends on inlet Air quality.

What connection standard is required for installation?


The unit uses a G-thread standard for the 1/2 port, allowing compatibility with common BSPP fittings and existing G-threaded piping.

What environmental limits should be observed during operation?


Do not exceed 50°C for ambient temperature and ensure system pressure remains at or below 18 bar to maintain safe operation.

Are there any conformity considerations for disposal or use?


The assembly complies with RoHS requirements, indicating restricted use of certain hazardous substances in its components.

Liens connexes