Fluke Networks FI-525 Single & Multimode Fibre Optic Test Kit
- N° de stock RS:
- 123-6403
- Numéro d'article Distrelec:
- 300-76-114
- Référence fabricant:
- FI-525
- Fabricant:
- Fluke Networks
Sous-total (1 unité)*
3 564,00 €
(TVA exclue)
4 312,44 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stock limité
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 3 564,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 123-6403
- Numéro d'article Distrelec:
- 300-76-114
- Référence fabricant:
- FI-525
- Fabricant:
- Fluke Networks
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke Networks | |
| Product Type | Fibre Tester | |
| Cable Type | Single & Multimode | |
| Equipment Type | Fibre Optic Test Kit | |
| Connector Type | ST, LC Port, LC, SC, FC Port | |
| Resolution | 1 μm | |
| Interface Type | USB | |
| Magnification | 200 | |
| Battery Type | Nickel-Metal Hydride | |
| Plug Type | 3-Pin (Global) | |
| Battery Life | 3h | |
| Width | 80mm | |
| Weight | 275g | |
| Length | 140mm | |
| Height | 39mm | |
| Power Source | Mains, Battery | |
| Standards/Approvals | IEC 62133, IEC 610101 3rd Edition | |
| Includes | Adapter, Cord, Display, Battery | |
| Model Number | FI-525 | |
| Maximum Operating Temperature | 40°C | |
| Minimum Operating Temperature | 0°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke Networks | ||
Product Type Fibre Tester | ||
Cable Type Single & Multimode | ||
Equipment Type Fibre Optic Test Kit | ||
Connector Type ST, LC Port, LC, SC, FC Port | ||
Resolution 1 μm | ||
Interface Type USB | ||
Magnification 200 | ||
Battery Type Nickel-Metal Hydride | ||
Plug Type 3-Pin (Global) | ||
Battery Life 3h | ||
Width 80mm | ||
Weight 275g | ||
Length 140mm | ||
Height 39mm | ||
Power Source Mains, Battery | ||
Standards/Approvals IEC 62133, IEC 610101 3rd Edition | ||
Includes Adapter, Cord, Display, Battery | ||
Model Number FI-525 | ||
Maximum Operating Temperature 40°C | ||
Minimum Operating Temperature 0°C | ||
- Pays d'origine :
- LT
Fluke Fibre Tester, 1 μm Resolution, 275 g Weight - FI-525
This Fibre tester is a portable Fibre optic inspection probe designed to inspect singlemode and multimode Fibres and assess connector endfaces in the field. It operates from mains or battery power and connects via USB for data transfer, making it suitable for on-site checks in automation, electronics, electrical and mechanical maintenance contexts.
Features & Benefits
• High-resolution microscope delivers 1 μm detail for precise assessment
• Multiple connector support inspects ST, LC, SC and FC Interfaces
• Ni‑MH battery probe provides 3 h continuous and 6 h typical runtime
• Lightweight portable design weighs 275 g for easy transport
• USB Interface enables straightforward data export and archiving
• Compliant battery chemistry meets IEC 62133 and IEC 61010‑1 Third Edition standards
• Multiple connector support inspects ST, LC, SC and FC Interfaces
• Ni‑MH battery probe provides 3 h continuous and 6 h typical runtime
• Lightweight portable design weighs 275 g for easy transport
• USB Interface enables straightforward data export and archiving
• Compliant battery chemistry meets IEC 62133 and IEC 61010‑1 Third Edition standards
**Applications**
• Suitable for inspecting Fibre optic connector endfaces during installation
• Ideal for maintenance checks on singlemode and multimode links
• Used for troubleshooting connector contamination in control panels
• Can be used for pre‑commissioning inspection of industrial Fibre runs
• Ideal for maintenance checks on singlemode and multimode links
• Used for troubleshooting connector contamination in control panels
• Can be used for pre‑commissioning inspection of industrial Fibre runs
What connector types can it inspect?
It is compatible with standard ST, LC, SC and FC connector interfaces via supplied adapters for common endface examinations.
How is power managed between mains and battery?
The unit accepts mains power and includes a Ni‑MH battery
the probe runtime is specified as 3 h continuous operation and typically 6 h under normal use.
What environmental limits apply to operation?
The probe is rated to operate between 0 °C and 40 °C and is designed for typical indoor industrial environments.
What is included with the tool for immediate use?
Supplied items include adapters, cord, display and battery so it can be deployed without additional accessories.
Liens connexes
- Fluke Networks FI-500 Single & Multimode Fibre Optic Test Kit
- Fluke Networks FTK1475 Single & Multimode Fibre Optic Test Kit
- Fluke Networks FTK1375 Single & Multimode Fibre Optic Test Kit
- Fluke Networks FTK1000 Multimode Fibre Optic Test Kit
- Fluke Networks FTS900 Multimode Fibre Optic Test Kit
- Fluke Networks Fiber QuickMap Multimode Fibre Optic Test Kit
- Fluke Networks FiberLert-125 Single & Multimode Fibre Optic Locator
- Fluke Networks FTK2000 Single Mode Fibre Optic Test Kit