Fluke Networks FI-500 Single & Multimode Fibre Optic Test Kit
- N° de stock RS:
- 123-6402
- Numéro d'article Distrelec:
- 300-76-090
- Référence fabricant:
- FI-500
- Fabricant:
- Fluke Networks
Sous-total (1 unité)*
3 254,00 €
(TVA exclue)
3 937,34 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stock limité
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 2 unité(s) expédiée(s) à partir du 08 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 3 254,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 123-6402
- Numéro d'article Distrelec:
- 300-76-090
- Référence fabricant:
- FI-500
- Fabricant:
- Fluke Networks
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke Networks | |
| Cable Type | Single & Multimode | |
| Product Type | Fibre Tester | |
| Equipment Type | Fibre Optic Test Kit | |
| Connector Type | ST, LC, LC Port, FC Port, SC | |
| Resolution | 1 μm | |
| Interface Type | USB | |
| Magnification | 200 | |
| Battery Type | Nickel-Metal Hydride | |
| Plug Type | 3-Pin (Global) | |
| Battery Life | 2h | |
| Width | 44mm | |
| Height | 140mm | |
| Length | 72mm | |
| Weight | 230g | |
| Standards/Approvals | IEC | |
| Power Source | Mains, Battery | |
| Includes | Battery, Cord, Display, Adapter | |
| Maximum Operating Temperature | 40°C | |
| Model Number | FI-500 | |
| Minimum Operating Temperature | 0°C | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke Networks | ||
Cable Type Single & Multimode | ||
Product Type Fibre Tester | ||
Equipment Type Fibre Optic Test Kit | ||
Connector Type ST, LC, LC Port, FC Port, SC | ||
Resolution 1 μm | ||
Interface Type USB | ||
Magnification 200 | ||
Battery Type Nickel-Metal Hydride | ||
Plug Type 3-Pin (Global) | ||
Battery Life 2h | ||
Width 44mm | ||
Height 140mm | ||
Length 72mm | ||
Weight 230g | ||
Standards/Approvals IEC | ||
Power Source Mains, Battery | ||
Includes Battery, Cord, Display, Adapter | ||
Maximum Operating Temperature 40°C | ||
Model Number FI-500 | ||
Minimum Operating Temperature 0°C | ||
- Pays d'origine :
- LT
Fluke Fibre Tester, 3h Continuous Probe Battery Life, 1μm Resolution - FI-500
This Fibre tester is a compact, handheld endface inspection scope designed for Rapid Visual checks of single‑mode and multi‑mode connectors in dense patch panels and confined spaces. It combines a handheld probe with a backlit display and integrated PortBright illumination to aid port identification and endface viewing in low‑light environments, helping technicians quickly assess connector cleanliness and Basic physical condition.
Features & Benefits
• 200x magnification gives high‑detail inspection with zoom options
• 1 μm resolution enables detection of microscopic contaminants
• 320x240 backlit display provides clear live imaging for analysis
• Probe powered via USB simplifies power management on‑site
• NiMH battery provides 3 h continuous probe operation
• IEC safety standards compliance supports regulated workplace use
• 1 μm resolution enables detection of microscopic contaminants
• 320x240 backlit display provides clear live imaging for analysis
• Probe powered via USB simplifies power management on‑site
• NiMH battery provides 3 h continuous probe operation
• IEC safety standards compliance supports regulated workplace use
**Applications**
• Suitable for troubleshooting dense data‑centre patch panels under low light
• Ideal for inspecting Fibre patch cords and bulkhead connectors before mating
• Used with ST, LC, SC and FC ports for Visual endface checks
• Can be used for routine maintenance in automation and electronics facilities
• Suitable for single‑ and multi‑mode cable installations during commissioning
• Ideal for inspecting Fibre patch cords and bulkhead connectors before mating
• Used with ST, LC, SC and FC ports for Visual endface checks
• Can be used for routine maintenance in automation and electronics facilities
• Suitable for single‑ and multi‑mode cable installations during commissioning
How long does it take to obtain a Sharp image of an endface?
Autofocus achieves a clear view in under a second, with a pause function to freeze the image for closer inspection.
What connector support is available for varied installation requirements?
The probe accepts screw‑on tips for common connector types including ST, LC, SC and FC and supports both patch cords and bulkhead connectors.
How is the probe illuminated for dark cabinets and panels?
Two white LEDs provide port illumination while a coaxial blue LED lights the endface
a dedicated PortBright torch helps locate ports.
How is data or software updated and exported from the unit?
Software upgrades and video output use the USB 2.0 interface, permitting firmware updates and image transfer via a USB drive.
What operating conditions affect use in workplace environments?
The instrument operates from 0°C up to 40°C with mains or battery power and includes vibration and 1m drop resilience for field use.
Liens connexes
- Fluke Networks FI-525 Single & Multimode Fibre Optic Test Kit
- Fluke Networks FTK1475 Single & Multimode Fibre Optic Test Kit
- Fluke Networks FTK1375 Single & Multimode Fibre Optic Test Kit
- Fluke Networks Fiber QuickMap Multimode Fibre Optic Test Kit
- Fluke Networks FTK1000 Multimode Fibre Optic Test Kit
- Fluke Networks FiberLert-125 Single & Multimode Fibre Optic Locator
- Fluke Networks FTK2000 Single Mode Fibre Optic Test Kit
- Fluke Networks FTS900 Multimode Fibre Optic Test Kit