Broadcom Fibre Optic Transceiver, ST Connector, 100 Mbps 1380 nm 20-Pin
- N° de stock RS:
- 229-9744
- Référence fabricant:
- AFBR-5813TQZ
- Fabricant:
- Broadcom
Offre groupée disponible
Sous-total (1 plateau de 50 unités)*
1 404,55 €
(TVA exclue)
1 699,50 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | le plateau* |
|---|---|---|
| 50 - 50 | 28,091 € | 1 404,55 € |
| 100 - 200 | 27,351 € | 1 367,55 € |
| 250 - 450 | 26,65 € | 1 332,50 € |
| 500 + | 25,984 € | 1 299,20 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 229-9744
- Référence fabricant:
- AFBR-5813TQZ
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Product Type | Fibre Optic Transceiver | |
| Maximum Data Rate | 100Mbps | |
| Connector Shape | Round | |
| Transmitter Typical Rise Time | 3ns | |
| Transmitter Typical Fall Time | 3ns | |
| Receiver Jitter at Maximum Data Rate | 2.14ns | |
| Number of Pins | 20 | |
| Mount Type | Through Hole | |
| Connector Type | ST | |
| Transmitter Jitter at Maximum Data | 0.6ns | |
| Wavelength of Peak Sensitivity | 1380nm | |
| Width | 25.4mm | |
| Standards/Approvals | RoHS, UL | |
| Length | 39.6mm | |
| Height | 10.2mm | |
| Series | AFBR | |
| Output Signal Type | Analogue | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Product Type Fibre Optic Transceiver | ||
Maximum Data Rate 100Mbps | ||
Connector Shape Round | ||
Transmitter Typical Rise Time 3ns | ||
Transmitter Typical Fall Time 3ns | ||
Receiver Jitter at Maximum Data Rate 2.14ns | ||
Number of Pins 20 | ||
Mount Type Through Hole | ||
Connector Type ST | ||
Transmitter Jitter at Maximum Data 0.6ns | ||
Wavelength of Peak Sensitivity 1380nm | ||
Width 25.4mm | ||
Standards/Approvals RoHS, UL | ||
Length 39.6mm | ||
Height 10.2mm | ||
Series AFBR | ||
Output Signal Type Analogue | ||
- Pays d'origine :
- PH
The Broadcom AFBR-58x3xxZ series 125-MBd Fast Ethernet Transceiver provide the system designer with products to implement a range of 125-MBd Fast Ethernet and FDDI as well as 100-Mb/s Asynchronous Transfer Mode (ATM) designs. It is compatible to SFF-8472 (digital diagnostic interface for optical transceivers). Using the 2-wire serial interface, the transceivers provide real-time information on temperature, bias current, LED average output power, and receiver average input power. The interface also adds the ability to monitor the Receiver Loss of Signal (Rx_LOS). It is supplied in industry standard 1 x 9 transceiver package and has ST connector.
Full compatibility with 100BASE-FX version IEEE802.3u
Full compatibility with FDDI
DCPECL differential input and output data connections
DCPECL signal detect output
Industrial temperature range between -40°C and 85°C
Wave solder and aqueous wash process compatible
Liens connexes
- Broadcom AFBR-5813TQZ Fibre Optic Transceiver 100 Mbps 1380 nm 20-Pin
- Broadcom Fibre Optic Transceiver 100 Mbps 1380 nm 20-Pin
- Broadcom AFBR-5823TQZ Fibre Optic Transceiver 100 Mbps 1380 nm 20-Pin
- Broadcom Fibre Optic Transceiver 100 Mbps 1380 nm 20-Pin
- Broadcom AFBR-5813QZ Fibre Optic Transceiver 100 Mbps 1380 nm 20-Pin
- Broadcom Fibre Optic Transceiver 155 Mbps 1380 nm 10-Pin
- Broadcom AFBR-FS50B00 Fibre Optic Transceiver, 5000 Mbps 28-Pin
- Broadcom Fibre Optic Transceiver 125 MBd 1380 nm 20-Pin