Broadcom AFBR-2624Z 50 Mbps 685 nm Fibre Optic Receiver, Rectangular, Duplex Connector
- N° de stock RS:
- 189-4765
- Référence fabricant:
- AFBR-2624Z
- Fabricant:
- Broadcom
Sous-total (200 unités, dans un tube de 200)*
2 666,40 €
(TVA exclue)
3 226,40 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 400 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 400 unité(s) expédiée(s) à partir du 02 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le tube* |
|---|---|---|
| 200 + | 13,332 € | 2 666,40 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 189-4765
- Référence fabricant:
- AFBR-2624Z
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Maximum Data Rate | 50Mbps | |
| Product Type | Fibre Optic Receiver | |
| Connector Shape | Rectangular | |
| Wavelength of Peak Sensitivity | 685nm | |
| Typical Rise Time | 5ns | |
| Typical Fall Time | 5ns | |
| Number of Pins | 6 | |
| Mount Type | Through Hole | |
| Connector Type | Duplex | |
| Maximum Data Transmission Distance | 200m | |
| Width | 12.2mm | |
| Standards/Approvals | No | |
| Length | 18.8mm | |
| Height | 7.6mm | |
| Output Signal Type | TTL | |
| Series | Versatile Link | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Maximum Data Rate 50Mbps | ||
Product Type Fibre Optic Receiver | ||
Connector Shape Rectangular | ||
Wavelength of Peak Sensitivity 685nm | ||
Typical Rise Time 5ns | ||
Typical Fall Time 5ns | ||
Number of Pins 6 | ||
Mount Type Through Hole | ||
Connector Type Duplex | ||
Maximum Data Transmission Distance 200m | ||
Width 12.2mm | ||
Standards/Approvals No | ||
Length 18.8mm | ||
Height 7.6mm | ||
Output Signal Type TTL | ||
Series Versatile Link | ||
Broadcom Versatile Link Series Fibre Optic Receiver, 50Mbps Data Rate, 200m Transmission Distance - AFBR-2624Z
This Fibre optic receiver converts optical signals into TTL-level electrical outputs for short-range data links. It is designed for through-hole installation and accepts a duplex rectangular connector, making it suitable for Compact optical interfacing where moderate data rates and defined sensitivity are required.
Features and Benefits:
• TTL output provides direct digital interfacing with controllers
• 50Mb/s maximum data rate supports medium-speed communication
• 5 ns rise time enables Rapid signal edge response
• 5 ns fall time ensures consistent signal timing behaviour
• 200 m maximum transmission distance extends link reach in installations
• 6-pin configuration simplifies straightforward PCB connections
• 50Mb/s maximum data rate supports medium-speed communication
• 5 ns rise time enables Rapid signal edge response
• 5 ns fall time ensures consistent signal timing behaviour
• 200 m maximum transmission distance extends link reach in installations
• 6-pin configuration simplifies straightforward PCB connections
Applications
• Suitable for localised industrial sensor networks requiring TTL outputs
• Ideal for machine control links needing 50Mb/s throughput
• Used with duplex rectangular Fibre cables for bidirectional paths
• Can be used for short campus or plant interconnect links up to 200 m
• Appropriate for through-hole mounting on custom Interface boards
• Ideal for machine control links needing 50Mb/s throughput
• Used with duplex rectangular Fibre cables for bidirectional paths
• Can be used for short campus or plant interconnect links up to 200 m
• Appropriate for through-hole mounting on custom Interface boards
What optical Wavelength does it respond to most effectively?
Peak sensitivity occurs at 685 nm which aligns with specific emitter wavelengths for optimal detection.
How is the unit physically mounted to a circuit board?
It uses a through-hole mount style that secures the connector directly to the PCB for mechanical stability.
What connector format does it accept for Fibre cabling?
The receiver accepts a duplex rectangular connector to accommodate paired Fibre connections.
How many electrical connections are required for integration?
Integration requires six pins to provide signal and necessary electrical interfaces.
Liens connexes
- Broadcom AFBR-2624Z 50 Mbps 685 nm Fibre Optic Receiver
- Broadcom 50 MBd 685 nm Fibre Optic Receiver
- Broadcom AFBR-2529Z 50 MBd 685 nm Fibre Optic Receiver
- Broadcom 50 MBd 685 nm Fibre Optic Receiver, Square
- Broadcom AFBR-2531CZ 5 MBd 685 nm Fibre Optic Receiver, Rectangular
- Broadcom AFBR-2521CZ 5 MBd 685 nm Fibre Optic Receiver, Rectangular
- Broadcom AFBR-2541CZ 5 MBd 685 nm Fibre Optic Receiver, Rectangular
- Broadcom AFBR-2634Z 50 MBd 685 nm Fibre Optic Receiver, Square