Broadcom, HFBR-453xZ, POF, APC Single Mode Simplex Fibre Optic Connector, Plastic Optical 1 mm Fibre Size
- N° de stock RS:
- 841-5059P
- Fabricant:
- Broadcom
Bénéficiez d'une remise sur les achats en gros
Ajoutez 40 de plus pour économiser 1,44 €
Consulter les options de prix de grosSous-total 20 unités (conditionné en sac)*
23,68 €
(TVA exclue)
28,66 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 980 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Économie |
|---|---|---|
| 20 - 30 | 1,184 € | - |
| 40 - 60 | 1,148 € | 1,44 € |
| 70 - 90 | 1,111 € | 5,11 € |
| 100 + | 0,956 € | 22,80 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 841-5059P
- Fabricant:
- Broadcom
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Broadcom | |
| Product Type | Fibre Optic Connector | |
| Series | HFBR-453xZ | |
| Connector Type | POF | |
| Connector Polish | APC | |
| Single/Multimode | Single Mode | |
| Simplex/Duplex | Simplex | |
| Fibre Size | 1 mm | |
| Jacket Diameter | 2.22mm | |
| Optical Fibre Type | Plastic Optical | |
| Colour | Black | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Broadcom | ||
Product Type Fibre Optic Connector | ||
Series HFBR-453xZ | ||
Connector Type POF | ||
Connector Polish APC | ||
Single/Multimode Single Mode | ||
Simplex/Duplex Simplex | ||
Fibre Size 1 mm | ||
Jacket Diameter 2.22mm | ||
Optical Fibre Type Plastic Optical | ||
Colour Black | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Broadcom HFBR-453xZ Series Fibre Optic Connector, 2.22mm Jacket Diameter, Black - HFBR-4532Z
This Fibre optic connector provides a single-channel connection for plastic optical Fibre links, intended for applications requiring an angled physical contact finish and straightforward simplex installation. It is designed to operate within a wide ambient range and to Interface with 1 mm plastic optical Fibre using a polymer-based connector type, suitable for installations where controlled back-reflection and consistent mating are important.
Features and Benefits:
• APC angled polish reduces back-reflection for cleaner signal transmission
• Single-mode plastic optical performance for focused light propagation
• Operates across -40°C to 85°C for broad environmental tolerance
• Simplex configuration simplifies point-to-point link deployments
• Black housing offers discreet appearance and easy identification
• Single-mode plastic optical performance for focused light propagation
• Operates across -40°C to 85°C for broad environmental tolerance
• Simplex configuration simplifies point-to-point link deployments
• Black housing offers discreet appearance and easy identification
Applications
• Suitable for industrial control signal paths in harsh environments
• Ideal for short-reach single-channel data links in instrumentation
• Used with 1 mm POF cabling in machine-to-machine communications
• Can be used for replacement or repair of panel-mounted POF ports
• Appropriate for installations requiring APC polish on plastic Fibre
• Ideal for short-reach single-channel data links in instrumentation
• Used with 1 mm POF cabling in machine-to-machine communications
• Can be used for replacement or repair of panel-mounted POF ports
• Appropriate for installations requiring APC polish on plastic Fibre
What material type interfaces with the connector?
It mates with plastic optical Fibre of 1 mm nominal diameter.
How is temperature performance specified for field use?
The connector is rated for continuous operation from -40°C up to 85°C.
Which polish style does it employ and why is it chosen?
An angled physical contact polish is used to reduce reflected signal returning into the source.
Is the connector configured for multiple channels or a single path?
It is supplied as a simplex unit providing one optical transmission path.