Wurth Elektronik Openable, Diameter 6 mm Ferrite Sleeve, Apertures: 1 23.7 mm 18.2 mm 40.5 mm, For General Application,
- N° de stock RS:
- 814-9986
- Numéro d'article Distrelec:
- 110-63-498
- Référence fabricant:
- 74271112S
- Fabricant:
- Wurth Elektronik
Bénéficiez d'une remise sur les achats en gros
Ajoutez 10 de plus pour économiser 3%
Consulter les options de prix de grosSous-total (1 unité)*
4,04 €
(TVA exclue)
4,89 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 58 unité(s) prête(s) à être expédiée(s)
- Plus 644 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Économie |
|---|---|---|
| 1 - 9 | 4,04 € | - |
| 10 - 24 | 3,88 € | 3% |
| 25 - 49 | 3,68 € | 8% |
| 50 - 99 | 3,40 € | 15% |
| 100 + | 3,04 € | 24% |
*Prix donné à titre indicatif
- N° de stock RS:
- 814-9986
- Numéro d'article Distrelec:
- 110-63-498
- Référence fabricant:
- 74271112S
- Fabricant:
- Wurth Elektronik
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Wurth Elektronik | |
| Series | WE-STAR TEC | |
| Product Type | Ferrite Sleeve | |
| Sub Type | Snap Ferrite | |
| Application | General Application, Safety Relevant Application | |
| Material | 4W620 | |
| Key | No | |
| Impedance at 25 MHz | 175Ω | |
| Openable | Yes | |
| Impedance at 100 MHz | 316Ω | |
| Aperture Diameter | 6mm | |
| Number of Apertures | 1 | |
| External Depth | 23.7mm | |
| External Height | 18.2mm | |
| External Width | 40.5mm | |
| Standards/Approvals | REACH, RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Wurth Elektronik | ||
Series WE-STAR TEC | ||
Product Type Ferrite Sleeve | ||
Sub Type Snap Ferrite | ||
Application General Application, Safety Relevant Application | ||
Material 4W620 | ||
Key No | ||
Impedance at 25 MHz 175Ω | ||
Openable Yes | ||
Impedance at 100 MHz 316Ω | ||
Aperture Diameter 6mm | ||
Number of Apertures 1 | ||
External Depth 23.7mm | ||
External Height 18.2mm | ||
External Width 40.5mm | ||
Standards/Approvals REACH, RoHS | ||
Wurth Elektronik WE-STAR TEC Series Ferrite Sleeve, 175Ω Impedance at 25Mhz, 316Ω Impedance at 100MHz - 74271112S
This ferrite sleeve is an openable snap ferrite component intended to suppress high-frequency interference in both general and safety-relevant installations. It is manufactured from 4W620 material and designed to accept cables through a single 6mm aperture, allowing straightforward retrofitting and cable management in assemblies where EMI attenuation is required.
Features and Benefits:
• 175Ω impedance at 25MHz provides targeted low-frequency suppression
• 316Ω impedance at 100MHz enhances high-frequency attenuation
• Openable snap design allows Rapid installation on existing cables
• Single 6mm aperture supports typical signal and power conductors
• Complies with RoHS and REACH for material restriction adherence
• 316Ω impedance at 100MHz enhances high-frequency attenuation
• Openable snap design allows Rapid installation on existing cables
• Single 6mm aperture supports typical signal and power conductors
• Complies with RoHS and REACH for material restriction adherence
Applications
• Suitable for attenuation on control signal wiring
• Ideal for use on power leads in safety circuits
• Used for noise reduction in sensor cable runs
• Can be used for retrofitting existing harnesses
• Suitable for general Electronic Assembly noise mitigation
• Ideal for use on power leads in safety circuits
• Used for noise reduction in sensor cable runs
• Can be used for retrofitting existing harnesses
• Suitable for general Electronic Assembly noise mitigation
What material is used for its magnetic properties?
It is produced from 4W620 ferrite material which provides the required permeability for EMI suppression.
How does the component mount around cables?
The unit is openable and snaps closed around a conductor using its split-body design for clamp-on installation.
What approvals relate to hazardous substances?
The device meets REACH and RoHS approvals restricting specific hazardous substances.
What external envelope should be allowed for panel layout?
Plan for an external footprint of approximately 40.5mm width by 23.7mm depth and 18.2mm height.
Liens connexes
- Wurth Elektronik Openable Apertures: 1 23.7 mm 18.2 mm 40.5 mm
- Wurth Elektronik Openable Apertures: 1 23.7 mm 18.2 mm 40.5 mm, For Safety Relevant
- Wurth Elektronik Openable Apertures: 1 36.9 mm 18.2 mm 23.7 mm, For EMI Suppression
- Wurth Elektronik Openable Apertures: 1 24.5 mm 21 mm 40.5 mm, For Safety Relevant
- Wurth Elektronik Openable Apertures: 1 24.5 mm 21 mm 40.5 mm, For Safety Relevant
- Wurth Elektronik Openable Apertures: 1 21.7 mm 18.2 mm 35.1 mm, For Safety Relevant
- Wurth Elektronik Openable Apertures: 1 35.1 mm 18.2 mm 21.7 mm, For EMI Suppression
- Fair-Rite Openable Apertures: 1 11.7 mm 39.4 mm 23.7 mm, For EMI Suppression