Wurth Elektronik Openable, Diameter 13 mm Ferrite Sleeve, Apertures: 1 33.6 mm 29.5 mm 37.7 mm, For General Application

This ferrite sleeve is an openable core designed for general EMI suppression on cable runs. It provides frequency-dependent impedance to reduce interference in electronic assemblies while allowing simple retrofitting to existing wiring. The component is MADE from material 4W620 and includes a single pass-through aperture for straightforward installation in applications requiring removable attenuation.

• 158Ω impedance at 25MHz for low-frequency attenuation
• 278Ω impedance at 100MHz for mid-high frequency suppression
• Openable design enabling quick clamp-on installation
• Single aperture construction ensuring consistent cable placement
• REACH and RoHS approvals supporting regulatory conformity

• Suitable for noise reduction in power-supply leads
• Ideal for EMI control in signal-cable assemblies
• Used with harnesses requiring removable suppression elements
• Can be used for retrofitting existing equipment cabling
• Suitable for general-application electronic assemblies

The outer dimensions measure 33.6mm depth, 29.5mm height and 37.7mm width.

The through-hole diameter is 13mm to accept standard cable diameters.

It is produced using material 4W620 chosen for its magnetic-loss characteristics.

It is configured with a single aperture intended for one cable pass only.