Wurth Elektronik Openable, Diameter 55 mm Ferrite Sleeve, Apertures: 1 Key 60 mm 55 mm 62 mm, For EMI Suppression

This ferrite sleeve is an openable, snap-fit component designed to suppress electromagnetic interference on cable runs. Constructed from nickel-zinc material, it provides a Compact method to attenuate high-frequency noise where a single large aperture is required. The part is intended for in-line installation on cables and harnesses in environments requiring material compliance.

• 270Ω impedance at 25MHz delivers targeted low-frequency attenuation
• 420Ω impedance at 100MHz improves high-frequency suppression
• Openable snap design enables tool-free attachment to cables
• Single 55mm aperture accommodates larger cable bundles
• Nickel-zinc composition ensures magnetic loss performance

• Suitable for cable assemblies with high EMI sensitivity
• Ideal for use as a ferrite cable clamp Snap-on solution
• Used with power and signal harnesses needing EMI filtering
• Can be used for retrofitting existing cable routes
• Used for reducing conducted interference in equipment racks

It meets REACH and RoHS standards, indicating restricted-substance compliance.

There is one aperture designed to accept a single cable or bundle.

The external dimensions are 60mm depth, 55mm height and 62mm width.

The aperture diameter is 55mm, allowing accommodation of larger cable groups where a wide bore is required.