Wurth Elektronik Ferrite Ring Ferrite Core 50.8 mm, For: General Electronics 11.5 mm ID 19 mm OD
- N° de stock RS:
- 617-1259
- Numéro d'article Distrelec:
- 158-55-348
- Référence fabricant:
- 74270057
- Fabricant:
- Wurth Elektronik
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
4,50 €
(TVA exclue)
5,44 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 234 unité(s) expédiée(s) à partir du 29 octobre 2026
- Plus 410 unité(s) expédiée(s) à partir du 29 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 9 | 4,50 € |
| 10 - 99 | 4,16 € |
| 100 - 499 | 3,63 € |
| 500 - 999 | 3,37 € |
| 1000 + | 3,04 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 617-1259
- Numéro d'article Distrelec:
- 158-55-348
- Référence fabricant:
- 74270057
- Fabricant:
- Wurth Elektronik
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Wurth Elektronik | |
| Product Type | Ferrite Ring | |
| Sub Type | Ferrite Core | |
| Minimum Frequency | 25MHz | |
| Application | General Electronics | |
| Material | Ferrite | |
| Height | 50.8mm | |
| Maximum Frequency | 100MHz | |
| Inside Diameter | 11.5mm | |
| Outside Diameter | 19mm | |
| Standards/Approvals | RoHS, REACH | |
| Series | WE-AFB | |
| Sélectionner tout | ||
|---|---|---|
Marque Wurth Elektronik | ||
Product Type Ferrite Ring | ||
Sub Type Ferrite Core | ||
Minimum Frequency 25MHz | ||
Application General Electronics | ||
Material Ferrite | ||
Height 50.8mm | ||
Maximum Frequency 100MHz | ||
Inside Diameter 11.5mm | ||
Outside Diameter 19mm | ||
Standards/Approvals RoHS, REACH | ||
Series WE-AFB | ||
Wurth Elektronik WE-AFB Series Ferrite Ring, 50.8mm Height, Ferrite - 74270057
This ferrite ring is a toroidal ferrite core designed for general electronic use where suppression of electromagnetic interference is required. It operates across a controlled high-frequency band and is intended for insertion around single or multiple conductors to reduce noise. The component is supplied in a ferrite composition suitable for common EMI mitigation roles within electronic assemblies.
Features and Benefits:
• Minimum usable frequency supports higher-frequency suppression
• Maximum usable frequency allows targeting mid-range EMI attenuation
• Compliant with chemical restriction standards for material safety
• Toroidal form enables straightforward cable or wire placement
• Solid ferrite composition provides consistent magnetic behaviour
• Maximum usable frequency allows targeting mid-range EMI attenuation
• Compliant with chemical restriction standards for material safety
• Toroidal form enables straightforward cable or wire placement
• Solid ferrite composition provides consistent magnetic behaviour
Applications
• Suitable for choke use in cable suppression assemblies
• Used with signal wiring to reduce 25 to 100MHz interference
• Ideal for incorporation into General Electronics modules
• Can be used for 100MHz filtering in high-frequency circuits
• Appropriate for inline ferrite bead ring implementations
• Used with signal wiring to reduce 25 to 100MHz interference
• Ideal for incorporation into General Electronics modules
• Can be used for 100MHz filtering in high-frequency circuits
• Appropriate for inline ferrite bead ring implementations
What are the inner and outer mounting clearances required?
The part provides an internal aperture of 11.5mm and an external diameter of 19mm for conductor routing and clearance considerations.
Which frequency range should be targeted for suppression?
Use it for interference control in the 25MHz to 100MHz band where ferrite impedance is effective.
What standards relate to material restrictions and handling?
The component meets RoHS and REACH directives concerning restricted substances and chemical compliance.
How is the component typically oriented around cables?
The toroidal shape allows cables to be passed through the centre to form a choke without additional fastenings.
Liens connexes
- Wurth Elektronik Ferrite Ring Ferrite Core 50.8 mm, For: General Electronics 11.5 mm ID 19 mm OD
- RND Ferrite Ring Ferrite Core 7.5 mm General Electronics 19 mm ID 29 mm OD
- Wurth Elektronik Ferrite Ring Toroid Core 16 mm, For: General Electronics 19 mm ID 31.5 mm OD
- Wurth Elektronik Ferrite Ring Toroid Core 8 mm, For: General Electronics 19 mm ID 31.7 mm OD
- Wurth Elektronik Ferrite Ring Toroidal 8 mm, For: General Electronic Equipment 10.5 mm ID 19 mm OD
- Wurth Elektronik Ferrite Ring Nanocrystalline 5.5 mm, For: General Electronic Equipment
- Wurth Elektronik Ferrite Ring Toroidal 5.5 mm, For: General Electronic Equipment
- TDK Ferrite Ring Ferrite Core 2.5 mm, For: General Electronics 3.8 mm ID 6.3 mm OD