Wurth Elektronik Ferrite Ring Toroid Core 20 mm, For: EMI Suppression 35.5 mm ID 20 mm OD
- N° de stock RS:
- 163-4558
- Référence fabricant:
- 74270191
- Fabricant:
- Wurth Elektronik
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 plateau de 15 unités)*
90,18 €
(TVA exclue)
109,13 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 15 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 165 unité(s) expédiée(s) à partir du 04 novembre 2026
- Plus 135 unité(s) expédiée(s) à partir du 23 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le plateau* |
|---|---|---|
| 15 - 60 | 6,012 € | 90,18 € |
| 75 - 135 | 5,411 € | 81,17 € |
| 150 + | 5,14 € | 77,10 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 163-4558
- Référence fabricant:
- 74270191
- Fabricant:
- Wurth Elektronik
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Wurth Elektronik | |
| Product Type | Ferrite Ring | |
| Sub Type | Toroid Core | |
| Application | EMI Suppression | |
| Minimum Frequency | 25MHz | |
| Material | 4W620 | |
| Height | 20mm | |
| Maximum Frequency | 100MHz | |
| Inside Diameter | 35.5mm | |
| Outside Diameter | 20mm | |
| Standards/Approvals | RoHS, REACH | |
| Series | WE-TOF | |
| Sélectionner tout | ||
|---|---|---|
Marque Wurth Elektronik | ||
Product Type Ferrite Ring | ||
Sub Type Toroid Core | ||
Application EMI Suppression | ||
Minimum Frequency 25MHz | ||
Material 4W620 | ||
Height 20mm | ||
Maximum Frequency 100MHz | ||
Inside Diameter 35.5mm | ||
Outside Diameter 20mm | ||
Standards/Approvals RoHS, REACH | ||
Series WE-TOF | ||
- Pays d'origine :
- TW
Wurth Elektronik WE-TOF Series Ferrite Ring, 20mm Height, 35.5mm Inside Diameter - 74270191
This ferrite ring is designed to reduce electromagnetic interference in high-frequency circuits. It is fabricated from 4W620 ferrite material and intended for through-hole use where axial placement around conductors is required. The component operates across a defined frequency band suited to suppression tasks and complies with common material safety standards for use in manufacturing environments.
Features and Benefits:
• Suppresses EMI across 25MHz to 100MHz, improving signal integrity
• High-permeability 4W620 material reducing common-mode noise
• Toroid core geometry enabling efficient choke formation
• Meets RoHS and REACH, aiding material compliance efforts
• High-permeability 4W620 material reducing common-mode noise
• Toroid core geometry enabling efficient choke formation
• Meets RoHS and REACH, aiding material compliance efforts
Applications
• Suitable for EMI filtering on signal lines
• Ideal for choke components in high-frequency boards
• Used with cable harnesses for conducted emission control
• Can be used for interference reduction in consumer electronics
• Ideal for choke components in high-frequency boards
• Used with cable harnesses for conducted emission control
• Can be used for interference reduction in consumer electronics
What frequency range does it target for suppression?
It provides attenuation within the 25MHz to 100MHz band based on material response and geometry.
What mounting arrangement is intended for this component?
It is designed for through-hole placement, allowing conductors to pass through the toroidal aperture.
Which material properties affect its suppression performance?
The 4W620 ferrite composition offers permeability and loss characteristics suited to high-frequency EMI damping.
Which environmental standards are met by the component?
The component conforms to RoHS and REACH restricted-substance requirements.
Liens connexes
- Wurth Elektronik Ferrite Ring Toroid Core 20 mm, For: EMI Suppression 35.5 mm ID 20 mm OD
- Wurth Elektronik Ferrite Ring Toroid Core 12.7 mm, For: EMI Suppression 35.5 mm ID 61 mm OD
- Wurth Elektronik Ferrite Ring Toroid Core 13 mm, For: EMI Suppression 16 mm ID 13 mm OD
- Wurth Elektronik Ferrite Ring Toroid Core 8 mm, For: EMI Suppression 5 mm ID 8 mm OD
- Wurth Elektronik Ferrite Ring Toroid Core 16 mm, For: EMI Suppression 12 mm ID 16 mm OD
- Wurth Elektronik Ferrite Ring Toroid Core 7.5 mm, For: EMI Suppression 25.4 mm ID 7.5 mm OD
- Wurth Elektronik Ferrite Ring Toroid Core 10 mm, For: EMI Suppression 10.2 mm ID 10 mm OD
- Wurth Elektronik Ferrite Ring Toroid Core 6 mm, For: EMI Suppression 10.2 mm ID 6 mm OD