Références fabricant

Wurth Elektronik Ferrite Ring EMI Suppression Axial Ferrite Bead 9.5 mm, For: Wrapping Cable, Coaxial Cable,

N° de stock RS:: 144-9783
Référence fabricant:: 74270033
Fabricant:: Wurth Elektronik

Wurth Elektronik Ferrite Ring EMI Suppression Axial Ferrite Bead 9.5 mm, For: Wrapping Cable, Coaxial Cable,

Sous-total (1 sachet de 500 unités)*

258,00 €

(TVA exclue)

312,00 €

(TVA incluse)

Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard

Unité	Prix par unité	Le Sachet*
500 +	0,516 €	258,00 €

*Prix donné à titre indicatif

N° de stock RS:: 144-9783
Référence fabricant:: 74270033
Fabricant:: Wurth Elektronik

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Wurth Elektronik
	Product Type	Ferrite Ring
	Sub Type	EMI Suppression Axial Ferrite Bead
	Minimum Frequency	25MHz
	Application	Wrapping Cable, Coaxial Cable, Multiconductor Wire, Wire
	Material	3 W 800 (Ferrite)
	Height	9.5mm
	Maximum Frequency	100MHz
	Inside Diameter	4.75mm
	Outside Diameter	9.5mm
	Series	WE-AFB
	Standards/Approvals	RoHS, REACH

	Sélectionner tout
	Marque Wurth Elektronik
	Product Type Ferrite Ring
	Sub Type EMI Suppression Axial Ferrite Bead
	Minimum Frequency 25MHz
	Application Wrapping Cable, Coaxial Cable, Multiconductor Wire, Wire
	Material 3 W 800 (Ferrite)
	Height 9.5mm
	Maximum Frequency 100MHz
	Inside Diameter 4.75mm
	Outside Diameter 9.5mm
	Series WE-AFB
	Standards/Approvals RoHS, REACH

Datasheet

Pays d'origine :: TW

Wurth Elektronik WE-AFB Series Ferrite Ring, 9.5mm Outside Diameter, 4.75mm Inside Diameter - 74270033

This ferrite ring is a magnetic suppression component designed to reduce electromagnetic interference on wrapped and coaxial conductors and on wire bundles. It is manufactured from 3W800 ferrite material and intended for insertion onto cables to attenuate common-mode noise within a medium-frequency band while complying with environmental substance regulations.

Features and Benefits:

• 25 to 100MHz frequency range attenuates mid-band interference
• 3W800 ferrite material provides targeted impedance rise
• Axial configuration enables simple in-line installation
• Compatible with multiconductor assemblies for broad mitigation
• RoHS and REACH conformity supports regulated product builds

Applications

• Used with coaxial cable for signal integrity protection
• Suitable for wrapping cable to suppress radiated noise
• Used for multiconductor wire EMI reduction in harnesses
• Ideal for axial placement in wire assembly runs
• Can be used as a ferrite choke on cable bundles

What physical sizes determine fit on a cable?

The component has a 9.5mm outside diameter and a 4.75mm inside diameter which set its fit range for cable jackets.

Which frequency band does it principally affect?

It provides attenuation primarily across the 25MHz to 100MHz band where many common-mode disturbances occur.

What material properties influence its electrical behaviour?

The 3W800 ferrite composition yields impedance characteristics tailored for mid-frequency noise suppression, increasing reactance with frequency.

Can it be applied to both single and multiple conductors?

Yes, the axial ferrite bead design is compatible with single coaxial cores and bundled multiconductor runs for EMI reduction.

What regulatory attributes are present for integration?

It meets RoHS and REACH provisions relevant to restricted substances for many industrial supply chains.