Murata Ferrite Bead 500 μm (Surface) (0402) (Chip Ferrite Bead), 111 Ω impedance at 25 MHz, 220 Ω impedance at 100 MHz,
- N° de stock RS:
- 223-4859
- Référence fabricant:
- BLM15EG221SH1D
- Fabricant:
- Murata
Sous-total (1 bobine de 10000 unités)*
170,00 €
(TVA exclue)
210,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Temporairement en rupture de stock
- Expédition à partir du 21 juin 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 10000 + | 0,017 € | 170,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 223-4859
- Référence fabricant:
- BLM15EG221SH1D
- Fabricant:
- Murata
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Murata | |
| Package Type | 0402 | |
| Product Type | Ferrite Bead | |
| Impedance at 25 MHz | 111Ω | |
| Impedance at 50 MHz | 163Ω | |
| Impedance at 100 MHz | 220Ω | |
| Packaging | 8mm wide Paper Tape | |
| Impedance at 300 MHz | 273Ω | |
| Impedance at 1 GHz | 270Ω | |
| Mount Type | Surface | |
| Sub Type | Chip Ferrite Bead | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Length | 1mm | |
| Height | 500μm | |
| Depth | 500μm | |
| Standards/Approvals | AEC-Q200 | |
| Automotive Standard | AEC-Q200 | |
| Application | Automotive Electronics | |
| Material | Ferrite | |
| Series | BLM15EG_SH | |
| Sélectionner tout | ||
|---|---|---|
Marque Murata | ||
Package Type 0402 | ||
Product Type Ferrite Bead | ||
Impedance at 25 MHz 111Ω | ||
Impedance at 50 MHz 163Ω | ||
Impedance at 100 MHz 220Ω | ||
Packaging 8mm wide Paper Tape | ||
Impedance at 300 MHz 273Ω | ||
Impedance at 1 GHz 270Ω | ||
Mount Type Surface | ||
Sub Type Chip Ferrite Bead | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Length 1mm | ||
Height 500μm | ||
Depth 500μm | ||
Standards/Approvals AEC-Q200 | ||
Automotive Standard AEC-Q200 | ||
Application Automotive Electronics | ||
Material Ferrite | ||
Series BLM15EG_SH | ||
- Pays d'origine :
- JP
The Murata BLM15EG series chip ferrite bead has excellent frequency impedance characteristics. It is suitable for noise suppression in 1GHz or higher frequency. It can be used in high current circuits due to its low DC resistance. It has impedance of 220 ohm.
No Lead production using Ni+Sn plating in termination
Operating temperature range from -55 °C to 125 °C
Liens connexes
- Murata Ferrite Bead 500 μm (Surface) (0402) (Chip Ferrite Bead) 220 Ω impedance at 100 MHz,
- Murata Ferrite Bead 400 μm (Solder) (0201) (Chip Ferrite Bead) 247 Ω impedance at 100 MHz,
- KEMET Ferrite Bead (Tape & Reel) (Chip Bead) 120 Ω impedance at 100 MHz, 321 Ω impedance at
- KEMET Ferrite Bead (Tape & Reel) (Chip Bead) 80 Ω impedance at 100 MHz, 85.8 Ω impedance at
- Murata Ferrite Bead 600 μm (0603) (Chip Ferrite Bead) 8.5 Ω impedance at 100 MHz, 19.8 Ω
- Murata Ferrite Bead 500 μm (Surface) (0402) (Chip Ferrite Bead) 600 Ω impedance at 100 MHz,
- Murata Ferrite Bead 500 μm (Surface) (0402) (Chip Ferrite Bead) 330 Ω impedance at 100 MHz,
- Murata Ferrite Bead 500 μm (Surface) (0402) (Chip Ferrite Bead) 470 Ω impedance at 100 MHz,