Murata Ferrite Bead 0.3 mm (Surface) (1005) (Chip Ferrite Bead), 3.96 Ω impedance at 25 MHz, 14.4 Ω impedance at 100
- N° de stock RS:
- 223-4819
- Référence fabricant:
- BLF02RD331GNED
- Fabricant:
- Murata
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
- N° de stock RS:
- 223-4819
- Référence fabricant:
- BLF02RD331GNED
- Fabricant:
- Murata
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Murata | |
| Product Type | Ferrite Bead | |
| Package Type | 1005 | |
| Impedance at 25 MHz | 3.96Ω | |
| Impedance at 50 MHz | 7.41Ω | |
| Impedance at 100 MHz | 14.4Ω | |
| Packaging | Tape & Reel | |
| Impedance at 300 MHz | 44.8Ω | |
| Impedance at 1 GHz | 201Ω | |
| Current Rating | 220mA | |
| Sub Type | Chip Ferrite Bead | |
| Mount Type | Surface | |
| Minimum Operating Temperature | -55°C | |
| Maximum Operating Temperature | 125°C | |
| Height | 0.3mm | |
| Depth | 0.2mm | |
| Maximum DC Resistance | 600mΩ | |
| Standards/Approvals | RoHS, REACH | |
| Length | 0.4mm | |
| Series | BLF02 | |
| Application | EMI Suppression Filter | |
| Automotive Standard | AEC-Q200 | |
| Material | Ferrite | |
| Sélectionner tout | ||
|---|---|---|
Marque Murata | ||
Product Type Ferrite Bead | ||
Package Type 1005 | ||
Impedance at 25 MHz 3.96Ω | ||
Impedance at 50 MHz 7.41Ω | ||
Impedance at 100 MHz 14.4Ω | ||
Packaging Tape & Reel | ||
Impedance at 300 MHz 44.8Ω | ||
Impedance at 1 GHz 201Ω | ||
Current Rating 220mA | ||
Sub Type Chip Ferrite Bead | ||
Mount Type Surface | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature 125°C | ||
Height 0.3mm | ||
Depth 0.2mm | ||
Maximum DC Resistance 600mΩ | ||
Standards/Approvals RoHS, REACH | ||
Length 0.4mm | ||
Series BLF02 | ||
Application EMI Suppression Filter | ||
Automotive Standard AEC-Q200 | ||
Material Ferrite | ||
- Pays d'origine :
- JP
The Murata BLF02RD series chip ferrite bead is designed to function nearly as a resistor at noise frequencies, which greatly reduces the possibility of resonance and leaves signal wave forms undistorted. It is effective in circuits without stable ground lines. It can be used in high current circuits due to its low DC resistance. It is designed to have high impedance at 2.4GHz which is suitable for immunity noise suppression for LTE band, Wi-Fi band.
Nickel barrier structure of the external electrodes provides excellent solder heat resistance
Operating temperature range from -55 °C to 125 °C
Does not need a connection to ground
Liens connexes
- Murata Ferrite Bead 0.3 mm (Surface) (1005) (Chip Ferrite Bead) 14.4 Ω impedance at 100
- Murata Ferrite Bead 0.3 mm (Surface) (1005) (Chip Ferrite Bead) 10 Ω impedance at 100 MHz,
- Murata Ferrite Bead 0.3 mm (Surface) (1005) (Chip Ferrite Bead) 18 Ω impedance at 100 MHz,
- Murata Ferrite Bead 0.3 mm (Surface) (1005) (Chip Ferrite Bead) 195 Ω impedance at 100 MHz,
- Murata Ferrite Bead 0.3 mm (Surface) (1005) (Chip Ferrite Bead) 253 Ω impedance at 100 MHz,
- Murata Ferrite Bead 0.3 mm (Surface) (1005) (Chip Ferrite Bead) 20.8 Ω impedance at 100 MHz,
- Wurth Elektronik Ferrite Bead (0402) (Ferrite Bead) 216 Ω impedance at 1 GHz
- KEMET Ferrite Bead (Tape & Reel) (Chip Bead) 80 Ω impedance at 100 MHz, 85.8 Ω impedance at