Microchip, Controller IC, 3.3 V 10 Mbps Serial-SPI, 28-Pin 3.6 V QFN EP

Voir la catégorie

Sous-total (1 tube de 61 unités)*

213,744 €

(TVA exclue)

258,64 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Commandes ci-dessous 75,00 € coût (TVA exclue) 5,95 €.
Temporairement en rupture de stock
  • Expédition à partir du 31 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
le tube*
61 +3,504 €213,74 €

*Prix donné à titre indicatif

N° de stock RS:
889-5294
Référence fabricant:
ENC28J60-I/ML
Fabricant:
Microchip
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Microchip

Product Type

Controller IC

Maximum Data Rate

10Mbps

Sub Type

Ethernet Controller

Communication Mode

Full Duplex/Half Duplex

Standard Supported

IEEE 802.3

Interface Type

Serial-SPI

Number of Ports

1

Mount Type

Surface

Package Type

QFN EP

Pin Count

28

Maximum Supply Voltage

3.6V

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

85°C

Height

1mm

Width

6 mm

Length

6mm

Minimum Supply Voltage

3.3V

Standards/Approvals

ISO 9001:2000, ISO/TS-16949:2002

Automotive Standard

No

ECN28J60 10Base-T Ethernet Controllers


The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.

Features and Benefits:


  • 10BASE-T

  • Integrated MAC and PHY

  • 10Mbps bandwidth

  • IEEE 802.3 compatible

  • SPI interface with clock speeds up to 25Mhz

  • Supports MAC Unicast, Multicast and Broadcast packets

  • PHY loopback mode and programmable outputs

    • Applications:


  • Security

  • Instrumentation

  • Home control

  • Building automation

  • Industrial automation

  • VoIP

    • PHY and MAC?


    PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.

    MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.

    Daughter boards


  • AC164121 – 667-7899

  • AC164123 – 667-7902

    • Ethernet Communications - Microchip


    Liens connexes