Microchip ENC28J60-I/ML, Controller IC, 3.3 V 10 Mbps Serial-SPI, 28-Pin 3.6 V QFN EP
- N° de stock RS:
- 666-5710
- Référence fabricant:
- ENC28J60-I/ML
- Fabricant:
- Microchip
Offre groupée disponible
Sous-total (1 unité)*
4,63 €
(TVA exclue)
5,60 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 50 unité(s) expédiée(s) à partir du 25 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 24 | 4,63 € |
| 25 - 99 | 4,51 € |
| 100 + | 4,39 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 666-5710
- Référence fabricant:
- ENC28J60-I/ML
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Product Type | Controller IC | |
| Maximum Data Rate | 10Mbps | |
| Sub Type | Ethernet Controller | |
| Communication Mode | Full Duplex/Half Duplex | |
| Standard Supported | IEEE 802.3 | |
| Interface Type | Serial-SPI | |
| Number of Ports | 1 | |
| Mount Type | Surface | |
| Package Type | QFN EP | |
| Maximum Supply Voltage | 3.6V | |
| Pin Count | 28 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1mm | |
| Length | 6mm | |
| Standards/Approvals | ISO 9001:2000, ISO/TS-16949:2002 | |
| Minimum Supply Voltage | 3.3V | |
| Width | 6 mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Product Type Controller IC | ||
Maximum Data Rate 10Mbps | ||
Sub Type Ethernet Controller | ||
Communication Mode Full Duplex/Half Duplex | ||
Standard Supported IEEE 802.3 | ||
Interface Type Serial-SPI | ||
Number of Ports 1 | ||
Mount Type Surface | ||
Package Type QFN EP | ||
Maximum Supply Voltage 3.6V | ||
Pin Count 28 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 1mm | ||
Length 6mm | ||
Standards/Approvals ISO 9001:2000, ISO/TS-16949:2002 | ||
Minimum Supply Voltage 3.3V | ||
Width 6 mm | ||
Automotive Standard No | ||
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.
Features and Benefits:
Applications:
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.
Daughter boards
Ethernet Communications - Microchip
Liens connexes
- Microchip ENC28J60-I/ML 10Mbps MII Serial-SPI 28-Pin QFN EP
- Microchip ENC424J600-I/ML 10Mbps MII Serial-SPI 44-Pin QFN
- Microchip ENC28J60-I/SS 10Mbps MII Serial-SPI 28-Pin SSOP
- Microchip ENC624J600-I/PT 10Mbps MII Serial-SPI 64-Pin TQFP
- Microchip ENC424J600-I/PT 10Mbps MII Serial-SPI 44-Pin TQFP
- Microchip ENC28J60-I/SO 10Mbps SPI 3.3 V, 28-Pin SOIC
- Microchip KSZ8993M 10Mbps MIISNI 3.3 V, 128-Pin PQFP
- Microchip KSZ8863MLLI 10Mbps MIISNI 3.3 V, 48-Pin LQFP