Microchip KSZ8081MLXIA, Ethernet Transceiver, 3.3 V 100 Mbps RMII v1.2, 48-Pin 3.3 V LQFP
- N° de stock RS:
- 177-3902
- Numéro d'article Distrelec:
- 304-38-513
- Référence fabricant:
- KSZ8081MLXIA
- Fabricant:
- Microchip
Sous-total (1 paquet de 5 unités)*
7,58 €
(TVA exclue)
9,17 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 1 705 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 5 + | 1,516 € | 7,58 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-3902
- Numéro d'article Distrelec:
- 304-38-513
- Référence fabricant:
- KSZ8081MLXIA
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Ethernet Transceiver | |
| Sub Type | Transceiver | |
| Communication Mode | 10Base-T, 100Base-TX | |
| Interface Type | RMII v1.2 | |
| Standard Supported | IEEE 802.3 | |
| Mount Type | Surface Mount | |
| Package Type | LQFP | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 48 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.6mm | |
| Width | 4 mm | |
| Minimum Supply Voltage | 3.3V | |
| Length | 7.1mm | |
| Standards/Approvals | RoHS | |
| Automotive Standard | No | |
| Supply Current | 41mA | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 100Mbps | ||
Product Type Ethernet Transceiver | ||
Sub Type Transceiver | ||
Communication Mode 10Base-T, 100Base-TX | ||
Interface Type RMII v1.2 | ||
Standard Supported IEEE 802.3 | ||
Mount Type Surface Mount | ||
Package Type LQFP | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 48 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 1.6mm | ||
Width 4 mm | ||
Minimum Supply Voltage 3.3V | ||
Length 7.1mm | ||
Standards/Approvals RoHS | ||
Automotive Standard No | ||
Supply Current 41mA | ||
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable.
Single-chip 10Base-T/100Base-TX Ethernet transceiver
MII Interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management Interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed
Liens connexes
- Microchip KSZ8081MLXIA 3.3 V 100 Mbps RMII v1.2, 48-Pin 3.3 V LQFP
- Microchip KSZ8081MLXIA-TR 3.3 V 100 Mbps, 48-Pin 3.3 V LQFP
- Microchip KSZ8081RNDCA-TR 1.8 V 100 Mbps RMII v1.2, 24-Pin 3.3 V QFN
- Texas Instruments DP83848IVV/NOPB 3.3 V 100 Mbps RMII, 48-Pin 3.3 V LQFP
- Texas Instruments DP83848CVV/NOPB 3.3 V 100 Mbps RMII, 48-Pin 3.3 V LQFP
- Texas Instruments DP83848CVVX/NOPB 3.3 V 100 Mbps RMII, 48-Pin 3.3 V LQFP
- Texas Instruments DP83640TVV/NOPB 3.3 V 100 Mbps RMII, 48-Pin 3.3 V LQFP
- Microchip KSZ8721BLI 2.5 V 100 Mbps RMII 48-Pin 3.3 V LQFP