Microchip KSZ8081RNDCA-TR, Ethernet Transceiver, 1.8 V 100 Mbps RMII v1.2, 24-Pin 3.3 V QFN
- N° de stock RS:
- 177-2820
- Référence fabricant:
- KSZ8081RNDCA-TR
- Fabricant:
- Microchip
Sous-total (1 bobine de 1000 unités)*
704,00 €
(TVA exclue)
852,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 1 000 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 1000 + | 0,704 € | 704,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-2820
- Référence fabricant:
- KSZ8081RNDCA-TR
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Ethernet Transceiver | |
| Sub Type | PHY | |
| Communication Mode | 100Base-TX, 10Base-T | |
| Standard Supported | IEEE 802.3 | |
| Interface Type | RMII v1.2 | |
| Mount Type | Surface Mount | |
| Package Type | QFN | |
| Pin Count | 24 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Width | 4 mm | |
| Length | 4mm | |
| Height | 1mm | |
| Minimum Supply Voltage | 1.8V | |
| Standards/Approvals | RoHS | |
| Supply Current | 47mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 100Mbps | ||
Product Type Ethernet Transceiver | ||
Sub Type PHY | ||
Communication Mode 100Base-TX, 10Base-T | ||
Standard Supported IEEE 802.3 | ||
Interface Type RMII v1.2 | ||
Mount Type Surface Mount | ||
Package Type QFN | ||
Pin Count 24 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Width 4 mm | ||
Length 4mm | ||
Height 1mm | ||
Minimum Supply Voltage 1.8V | ||
Standards/Approvals RoHS | ||
Supply Current 47mA | ||
Automotive Standard No | ||
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ8081 is a highly-integrated PHY solution.
Ethernet transceiver
MII Interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management Interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed (10/100Mbps) and duplex (half/full)