RS PRO Enclosure Heater, 230V ac, 400W Output, 400W Input 300mm x 133 mm

Visuel non contractuel

Voir la catégorie
Offre groupée disponible

Sous-total (1 unité)*

106,62 €

(TVA exclue)

129,01 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 1 unité(s) prête(s) à être expédiée(s)
  • Plus 8 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 12 unité(s) expédiée(s) à partir du 16 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité
Prix par unité
1 - 9106,62 €
10 - 24102,67 €
25 - 4999,00 €
50 - 9995,59 €
100 +92,40 €

*Prix donné à titre indicatif

N° de stock RS:
754-5547
Fabricant:
RS PRO
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

RS PRO

Product Type

Enclosure Heater

Output Power

400W

Input Power

400W

Supply Voltage

230V ac

Depth

133mm

Mount Type

Screw

Connection Type

Screw

Width

300mm

IP Rating

IP20

Minimum Operating Temperature

-55°C

Maximum Operating Temperature

155°C

Standards/Approvals

No

Frequency

60Hz

Nominal Current

1.73A

Series

ACH400

RS PRO Anti-Condensation Heaters


A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.

A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.;Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.

A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.

Features and Benefits


  • Vitreous enamelled resistor

  • Sheet Steel case

  • Perforated sheet Steel cover

    • Note: The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom

    Why RS PRO?


    Looking to reduce costs but keep the same quality?

    With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.

    Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.

    Note

    The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.

    Liens connexes