RS PRO, 93 °C Enclosure Heater, 110V ac, 80W Output 191mm x 67 mm
- N° de stock RS:
- 500-140
- Fabricant:
- RS PRO
Offre groupée disponible
Consulter les options de prix de grosSous-total (1 unité)*
58,51 €
(TVA exclue)
70,80 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 18 unité(s) expédiée(s) à partir du 12 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 58,51 € |
| 5 - 9 | 58,33 € |
| 10 - 24 | 56,40 € |
| 25 - 49 | 54,12 € |
| 50 + | 51,37 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 500-140
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Output Power | 80W | |
| Product Type | Enclosure Heater | |
| Supply Voltage | 110V ac | |
| Surface Temperature | 93°C | |
| Depth | 67mm | |
| Connection Type | Cable | |
| Mount Type | Surface | |
| Width | 191mm | |
| Insulated PTC | No | |
| Mounting Position | Horizontal | |
| Standards/Approvals | RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Output Power 80W | ||
Product Type Enclosure Heater | ||
Supply Voltage 110V ac | ||
Surface Temperature 93°C | ||
Depth 67mm | ||
Connection Type Cable | ||
Mount Type Surface | ||
Width 191mm | ||
Insulated PTC No | ||
Mounting Position Horizontal | ||
Standards/Approvals RoHS | ||
- Pays d'origine :
- GB
RS PRO Anti-Condensation Heaters
A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.
A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.;Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.
A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.
Features and Benefits
Note: The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom
Why RS PRO?
Looking to reduce costs but keep the same quality?
With a choice of over 65,000 products – all of which are rigorously tested against demanding industry standards before they are given the RS PRO seal of approval.
Trusted by engineers the world over, we want you to be confident that you’re receiving the exceptional quality, reliability and the best value for money.
Note
The recommended power rating required is 10W per square metre of enclosing surface, excluding the base. They should be mounted on a back surface with the heating element horizontal and the terminals at the bottom.
Liens connexes
- RS PRO 230V ac 80W Input 191mm x 67 mm
- RS PRO 110V ac 100W Input 191mm x 67 mm
- RS PRO 110V ac, 60W Output 121mm x 67 mm
- RS PRO 230V ac 100W Input 191mm x 67 mm
- RS PRO 230V ac 60W Input 121mm x 67 mm
- RS PRO 110V ac, 40W Output 121mm x 67 mm
- RS PRO 110V ac, 20W Output 65mm x 67 mm
- STEGO Enclosure Heater 550W Output 100mm x 128 mm