Banner SSA-EB Series Twist Release Emergency Stop Push Button, Surface Mount, 1 NC, IP65
- N° de stock RS:
- 232-5276
- Référence fabricant:
- SSA-EB1PLYR-12ED1Q8
- Fabricant:
- Banner
Sous-total (1 unité)*
297,11 €
(TVA exclue)
359,50 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 09 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 297,11 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 232-5276
- Référence fabricant:
- SSA-EB1PLYR-12ED1Q8
- Fabricant:
- Banner
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Banner | |
| Product Type | Emergency Stop Push Button | |
| Mount Type | Surface Mount | |
| Contact Configuration | 1 NC | |
| Housing Material | Aluminium, Polyamide, Polycarbonate | |
| Push Button Actuation | Twist Release | |
| Series | SSA-EB | |
| Illuminated | No | |
| IP Rating | IP65 | |
| Terminal Type | M12 Connector | |
| Contact Current | 1.5A | |
| Number of Auxiliary Contacts | 1 | |
| Contact DC Voltage | 75V dc | |
| Head Style | Square | |
| Switch Configuration | Latch | |
| Hazardous Area Certification | NO | |
| Head Diameter | 60mm | |
| Standards/Approvals | ISO 13850, NFPA 79, EN 60497-1 / -5-1, IEC/EN 60204-1, ANSI B11.19 | |
| Safety Contacts | 2 | |
| Sélectionner tout | ||
|---|---|---|
Marque Banner | ||
Product Type Emergency Stop Push Button | ||
Mount Type Surface Mount | ||
Contact Configuration 1 NC | ||
Housing Material Aluminium, Polyamide, Polycarbonate | ||
Push Button Actuation Twist Release | ||
Series SSA-EB | ||
Illuminated No | ||
IP Rating IP65 | ||
Terminal Type M12 Connector | ||
Contact Current 1.5A | ||
Number of Auxiliary Contacts 1 | ||
Contact DC Voltage 75V dc | ||
Head Style Square | ||
Switch Configuration Latch | ||
Hazardous Area Certification NO | ||
Head Diameter 60mm | ||
Standards/Approvals ISO 13850, NFPA 79, EN 60497-1 / -5-1, IEC/EN 60204-1, ANSI B11.19 | ||
Safety Contacts 2 | ||
- Pays d'origine :
- US
The Banner mushroom-style electro-mechanical emergency stop push buttons are rugged design, easy installation with no assembly or individual wiring required. “Safe Break Action” ensures normally closed (NC) contacts will open if the contact block is separated from the actuator. It has a flat mounting base for ease of mounting without requiring an additional enclosure.
Quick disconnect
Contact rating 2 A @ 24 V dc
Contact quantity 2 NC, 2 NO
The EZ-LIGHT® illumination logic allows for easy identification of a pushed/actuated button. An armed button will light a steady yellow or green illumination or off (depending on model), a pushed/actuated button is indicated by a red illumination flashing
Liens connexes
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button NC, IP65
- Banner SSA-EB Series Twist Release Emergency Stop Push Button 1 NC, IP65
- Banner SSA-EB Series Pull/Twist to Release Illuminated Emergency Stop Push Button Threaded Mount, 30 mm
- Banner Twist Release Emergency Stop Push Button 1 NC
- Banner SSA-EB Series Pull/Twist to Release Emergency Stop Push Button 14.5 mm Cutout, DPST
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button 30 mm Cutout IP65
- Banner SSA-EB.. Series Twist Release Emergency Stop Push Button 30 mm Cutout IP69, IP65