Banner SSA-EB Series Twist Release Emergency Stop Push Button, Surface Mount, 1 NC, IP65
- N° de stock RS:
- 232-5274
- Référence fabricant:
- SSA-EB1PLGR-12ED1Q8
- Fabricant:
- Banner
Sous-total (1 unité)*
282,50 €
(TVA exclue)
341,82 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 11 janvier 2027
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 282,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 232-5274
- Référence fabricant:
- SSA-EB1PLGR-12ED1Q8
- Fabricant:
- Banner
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Banner | |
| Mount Type | Surface Mount | |
| Product Type | Emergency Stop Push Button | |
| Contact Configuration | 1 NC | |
| Housing Material | Polyamide, Aluminium, Polycarbonate | |
| Push Button Actuation | Twist Release | |
| Series | SSA-EB | |
| Illuminated | No | |
| IP Rating | IP65 | |
| Terminal Type | M12 Connector | |
| Head Style | Square | |
| Number of Auxiliary Contacts | 1 | |
| Contact DC Voltage | 75V dc | |
| Contact Current | 2A | |
| Hazardous Area Certification | No | |
| Standards/Approvals | NFPA 79, ANSI B11.19, ISO 13850, IEC/EN 60204-1, EN 60497-1 / -5-1 | |
| Safety Contacts | 1 | |
| Sélectionner tout | ||
|---|---|---|
Marque Banner | ||
Mount Type Surface Mount | ||
Product Type Emergency Stop Push Button | ||
Contact Configuration 1 NC | ||
Housing Material Polyamide, Aluminium, Polycarbonate | ||
Push Button Actuation Twist Release | ||
Series SSA-EB | ||
Illuminated No | ||
IP Rating IP65 | ||
Terminal Type M12 Connector | ||
Head Style Square | ||
Number of Auxiliary Contacts 1 | ||
Contact DC Voltage 75V dc | ||
Contact Current 2A | ||
Hazardous Area Certification No | ||
Standards/Approvals NFPA 79, ANSI B11.19, ISO 13850, IEC/EN 60204-1, EN 60497-1 / -5-1 | ||
Safety Contacts 1 | ||
- Pays d'origine :
- JP
The Banner mushroom-style electro-mechanical emergency stop push buttons are rugged design, easy installation with no assembly or individual wiring required. “Safe Break Action” ensures normally closed (NC) contacts will open if the contact block is separated from the actuator. It has a flat mounting base for ease of mounting without requiring an additional enclosure.
Contact rating 2 A @ 24 V dc
Contact quantity 2 NC, 1 NO
Dimensions 103 x 110 x 81 mm
The EZ-LIGHT® illumination logic allows for easy identification of a pushed/actuated button. An armed button will light a steady yellow or green illumination or off (depending on model), a pushed/actuated button is indicated by a red illumination flashing
Liens connexes
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button NC, IP65
- Banner SSA-EB Series Twist Release Emergency Stop Push Button 1 NC, IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button 30 mm Cutout IP65
- Banner SSA-EB1PLx-0Dx Series Twist Release Illuminated Emergency Stop Push Button DPST, IP65
- Banner Twist Release Emergency Stop Push Button 1 NC
- Banner SSA-EB Series Pull/Twist to Release Emergency Stop Push Button 14.5 mm Cutout, DPST
- Banner SSA-EB Series Twist Release Emergency Stop Push Button 30 mm Cutout IP67, IP65