Metcal Pink Dispensing Tip Dispensing Tip, 20 Gauge
- N° de stock RS:
- 276-3533
- Numéro d'article Distrelec:
- 300-35-948
- Référence fabricant:
- 920050-45BTE
- Fabricant:
- Metcal
Sous-total (1 unité)*
47,47 €
(TVA exclue)
57,44 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité |
|---|---|
| 1 + | 47,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 276-3533
- Numéro d'article Distrelec:
- 300-35-948
- Référence fabricant:
- 920050-45BTE
- Fabricant:
- Metcal
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Metcal | |
| Product Type | Dispensing Tip | |
| Sub Type | Dispensing Tip | |
| Gauge | 20 | |
| For Use With | Fluid Dispenser | |
| Length | 12.7mm | |
| Colour | Pink | |
| Inside Diameter | 0.61mm | |
| Series | TE Bent Tip | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Metcal | ||
Product Type Dispensing Tip | ||
Sub Type Dispensing Tip | ||
Gauge 20 | ||
For Use With Fluid Dispenser | ||
Length 12.7mm | ||
Colour Pink | ||
Inside Diameter 0.61mm | ||
Series TE Bent Tip | ||
Standards/Approvals No | ||
Statut RoHS : Exempté
- Pays d'origine :
- CN
Metcal TE Bent Tip Series Dispensing Tip, 0.61mm Inside Diameter, 12.7mm Length - 920050-45BTE
This dispensing tip is a bent-nozzle accessory designed for controlled delivery of fluids from a compatible dispenser in laboratory and precision assembly settings. It is intended to provide directional flow and accurate placement of liquids when attached to a fluid dispenser.
Features and Benefits:
• 20-gauge bore provides consistent micro-volume flow
• 0.61 mm internal diameter enables fine droplet control
• Bent tip shape allows angled access in confined spaces
• Short length assists Rapid tip change and reduced dead volume
• Pink colour aids quick Visual identification during workflows
• 0.61 mm internal diameter enables fine droplet control
• Bent tip shape allows angled access in confined spaces
• Short length assists Rapid tip change and reduced dead volume
• Pink colour aids quick Visual identification during workflows
Applications
• Suitable for precision reagent dosing in labs
• Used with fluid dispensers for component coating
• Ideal for dispensing adhesives in small assemblies
• Can be used for spot application in microfabrication
• Used with fluid dispensers for component coating
• Ideal for dispensing adhesives in small assemblies
• Can be used for spot application in microfabrication
What fluid compatibility is supported?
It is intended for general liquid dispensing when fitted to a matching fluid dispenser and is appropriate for low-viscosity liquids within typical laboratory dosing ranges.
How does the tip assist with confined work areas?
The bent nozzle geometry provides angled delivery that permits access behind components or into narrow cavities without repositioning the dispenser.
How does colour coding affect workflow?
The pink finish enables Rapid identification of this specific gauge and length variant among other tips, simplifying inventory selection and reducing setup time.
What maintenance or replacement behaviour should be expected?
The short form factor facilitates straightforward replacement when wear or blockage occurs and minimises retained fluid after removal.
Liens connexes
- Metcal Pink Dispensing Tip Dispensing Tip, 20 Gauge
- Metcal Olive Dispensing Tip Dispensing Tip, 14 Gauge
- Metcal Green Dispensing Tip Dispensing Tip, 18 Gauge
- Metcal Orange Needle Nozzle Dispensing Tip, 23 Gauge
- Metcal Lavender Needle Nozzle Dispensing Tip, 30 Gauge
- Metcal Red Needle Nozzle Dispensing Tip, 25 Gauge
- Metcal Yellow Dispensing Tip Dispensing Tip, 20 Gauge
- Loctite Pink Taper Dispensing Tip, 20 Gauge