RS PRO Translucent Adhesive Applicator Kit AB1 Acrylic Bonding Adhesive, AB3 Acrylic Bonding Adhesive
- N° de stock RS:
- 229-4544
- Numéro d'article Distrelec:
- 304-18-992
- Fabricant:
- RS PRO
Sous-total (1 unité)*
11,88 €
(TVA exclue)
14,37 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 30 unité(s) expédiée(s) à partir du 08 juin 2026
- Plus 56 unité(s) expédiée(s) à partir du 08 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 11,88 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 229-4544
- Numéro d'article Distrelec:
- 304-18-992
- Fabricant:
- RS PRO
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | RS PRO | |
| Product Type | Adhesive Applicator Kit | |
| For Use With | AB1 Acrylic Bonding Adhesive, AB3 Acrylic Bonding Adhesive | |
| Kit Contents | Needle, Bottle (125 ml) x 2, Gloves | |
| Colour | Translucent | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque RS PRO | ||
Product Type Adhesive Applicator Kit | ||
For Use With AB1 Acrylic Bonding Adhesive, AB3 Acrylic Bonding Adhesive | ||
Kit Contents Needle, Bottle (125 ml) x 2, Gloves | ||
Colour Translucent | ||
Standards/Approvals No | ||
Statut RoHS : Exempté
- Pays d'origine :
- GB
Rigid Plastics (Acrylic) Bonding
A range of 3 versatile adhesives for the fabrication/manufacture of signs & point of sale (POP) displays when using acrylics, polycarbonates, high impact polystyrenes and PETG. The RS IGA range offers these 3 solvented adhesives in handy 250ml sizes to minimise wastage in smaller applications:
AB-1 – 1 part (single part) cement formulated to provide excellent bonding of small lap and butt joints on cast acrylics. It is also suitable for polycarbonate, high impact polystyrene and PETG and offers small gap filling qualities.
AB-2 – 2 part kit formulated to provide excellent bonding of all types of joints on the plastics mentioned above where an external exposure stronger bond is required.
AB-3 – 1 part (single part) cement formulated to provide excellent bonding of small lap and butt joints on extruded acrylics, polycarbonates, high impact polystyrenes and PETG. It will also give good results on cast acrylics. This water thin viscosity adhesive is ideal for use in by capillary action.
Pre-bond 1 – Solvent based cleaner in 250ml screw top can designed to clean & degrease the surfaces prior to bonding.
Liens connexes
- Loctite Translucent Adhesive Applicator Kit, 50ml
- 3M Black Adhesive Applicator Kit 1:1 And 2:1 200mL Cartridges
- RS PRO Adhesive Syringe Gun Acrylic adhesives, Epoxy 50ml
- Power Adhesives Tecbond Acrylic Adhesives Stick Acrylic Adhesive, 5 kg
- 3M Epoxy Gun 3M Scotch-Weld EPX two-component structural adhesives and applicator guns
- HellermannTyton Adhesive Syringe Gun
- Loctite Loctite SF 7457 Bottle Adhesive Activator for use with Acrylic Adhesive, 50 ml
- Wurth Elektronik ConTOOL Crimp Tool Applicator Kit for Crimping Tools for ConTOOL Applicator Kit for ConWTB Tools