Digilent 410-299 Programming Cable for use with Xilinx Tool, JTAG-HS3
- N° de stock RS:
- 134-6435
- Numéro d'article Distrelec:
- 300-44-265
- Référence fabricant:
- 410-299
- Fabricant:
- Digilent
Offre groupée disponible
Sous-total (1 unité)*
56,38 €
(TVA exclue)
68,22 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 15 unité(s) prête(s) à être expédiée(s)
- Plus 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 56,38 € |
| 5 - 9 | 53,56 € |
| 10 + | 51,87 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 134-6435
- Numéro d'article Distrelec:
- 300-44-265
- Référence fabricant:
- 410-299
- Fabricant:
- Digilent
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Digilent | |
| Product Type | Development Kit Accessory | |
| Accessory Type | Programming Cable | |
| For Use With | Xilinx Tool, JTAG-HS3 | |
| Standards/Approvals | No | |
| Distrelec Product Id | 30044265 | |
| Sélectionner tout | ||
|---|---|---|
Marque Digilent | ||
Product Type Development Kit Accessory | ||
Accessory Type Programming Cable | ||
For Use With Xilinx Tool, JTAG-HS3 | ||
Standards/Approvals No | ||
Distrelec Product Id 30044265 | ||
JTAG-HS3 FPGA Programming Cable
The JTAG-HS3 programming cable allows high-speed programming/debugging of Xilinx FPGA and SoC devices from a host PC.
Features
• Separate Vref drives JTAG signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG bus at up to 30Mbit/sec
• Compatible with Xilinx ISE 14.1 and newer
• Compatible with Xilinx Vivado 2013.3 and newer
• PC connector: MicroUSB
• JTAG connector: 2 x 7-pin 2mm
• Open-drain buffer on pin 14 allows processor reset of Xilinx Zynq platform
Supported Target Devices
• Xilinx FPGAs;• Xilinx Zynq-7000;• Xilinx CoolRunner™/CoolRunner-II CPLDs;• Xilinx Platform Flash ISP configuration PROMs;• Selected third-party SPI PROMs;• Selected third-party BPI PROMs
Target Devices Not Supported
• Xilinx 9500/9500XL CPLDs;• Xilinx 1700 and 18V00 ISP configuration PROMs;• Xilinx FPGA eFUSE programming
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
Note
This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
Supplied with
USB cable
Liens connexes
- Digilent 410-249 Programmer Adapter for use with Xilinx FPGAs
- Digilent 410-376 Xilinx Spartan-7 Development Board
- Digilent 410-352 Xilinx Spartan-7 Development Board for Hobbyists XC7S25-CSGA324
- Digilent 410-383-5EV Zynq Ultrascale+ MPSoC Development Board Development Board Xilinx Zynq UltraScale+ MPSoC EV Device
- Digilent USRP B205mini-i AD9364 RFIC GPS Development Board for GPIO, JTAG 6GHz 6002-410-021
- Digilent 471-036-2 Digilent Eclypse Z7 + two Zmod DAC Expansion Module Xilinx Zynq®-7000 SoC Family Device for Xilinx
- Digilent 471-036-1 Digilent Eclypse Z7 + two Zmod ADC Expansion Module Xilinx Zynq®-7000 SoC Family Device for Xilinx
- Digilent 410-384 for use with Breadboard