Digilent 410-251 Programming Module for use with FPGA Devices
- N° de stock RS:
- 134-6434
- Référence fabricant:
- 410-251
- Fabricant:
- Digilent
Offre groupée disponible
Sous-total (1 unité)*
55,91 €
(TVA exclue)
67,65 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- 24 unité(s) expédiée(s) à partir du 23 janvier 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 55,91 € |
| 5 - 9 | 53,11 € |
| 10 + | 51,44 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 134-6434
- Référence fabricant:
- 410-251
- Fabricant:
- Digilent
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Digilent | |
| Accessory Type | Programming Module | |
| Product Type | Development Kit Accessory | |
| For Use With | FPGA Devices | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Digilent | ||
Accessory Type Programming Module | ||
Product Type Development Kit Accessory | ||
For Use With FPGA Devices | ||
Standards/Approvals No | ||
JTAG-SMT2 SMT Programming Module
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.
Features
• Compatible with all Xilinx tools
• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)
• On-board ADP123AUJZ 300mA voltage regulator
• Separate Vref drives JTAG/SPI signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec
• JTAG/SPI frequency settable by user
• PC connector: MicroUSB (JTAG-SMT2 only)
• GPIO pin allows processor reset of Xilinx Zynq platform
• SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec
• Fully supported by Digilent's Adept software and Adept SDK
• Board dimensions: 22.75 x 21.5mm
RS Product Codes
• 134-6434 JTAG-SMT2 SMT Module
• 134-6473 JTAG-SMT2-NC SMT Module (without USB connector)
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
Note
This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
Liens connexes
- Digilent 410-308 Programming Module for use with FPGA Devices
- Digilent Pcam 5C OV5640, PB200-358 Module for FPGA 410-358
- Digilent 410-372 for use with APSoC Development Board, FPGA
- Digilent 410-249 Programmer Adapter for use with Xilinx FPGAs
- Digilent Module 410-310
- Digilent Module 410-212
- Digilent Expansion Module 410-113
- Digilent 410-319-1 FPGA Development Board for Makers and Hobbyists Development Board