TRACOPOWER TEN 30 DC-DC Converter, ±5V dc/ ±3A Output, 36 → 75 V dc Input, 30W, Through Hole, +85°C Max Temp
- N° de stock RS:
- 666-4348
- Référence fabricant:
- TEN 30-4821
- Fabricant:
- TRACOPOWER
Indisponible
RS n'aura plus ce produit en stock.
- N° de stock RS:
- 666-4348
- Référence fabricant:
- TEN 30-4821
- Fabricant:
- TRACOPOWER
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | TRACOPOWER | |
| Sélectionner tout | ||
|---|---|---|
Marque TRACOPOWER | ||
- Pays d'origine :
- TW
Traco 30W Single/Dual Output High Power Density Regulated Isolated DC-DC Converter - TEN 30 Series
30W single/dual output high power density regulated isolated DC-DC converter modules with a wide input voltage range and encapsulated metal package. These single/dual output high power density regulated isolated DC-DC converter modules have a high efficiency which allows an operating temperature range of -40°C to +85°C. Typical applications for these isolated DC-DC converter modules include mobile equipment, instrumentation and distributed power architectures in communication and industrial electronics.
High power density, 25.4x50.8x10.2mm package
Wide 2:1 input voltage range
Regulated outputs
±10% adjustable output voltage by using external resistors (single output models only)
1.5kV input / output isolation
High efficiency up to 91%
No minimum load required
Input filter meets EN 55022 Class A
Remote On/Off
Over-temperature, over-voltage, over-load and short circuit protection
Shielded metal case with insulated baseplate
Industry standard pin-out
Note
Operating temperature is with derating of 4% per °C above 65°C.
MTBF to MIL-HDBK-217F (25°C).
Load regulation for dual output models is for balanced load.
For suitable heatsink see stock number 745-1234
For suitable common mode chokes see stock number 745-1222 (L1) and 745-1231 (L2)
MTBF to MIL-HDBK-217F (25°C).
Load regulation for dual output models is for balanced load.
For suitable heatsink see stock number 745-1234
For suitable common mode chokes see stock number 745-1222 (L1) and 745-1231 (L2)
Standards
EN 60950-1, UL 60950-1, IEC 60950-1
Liens connexes
- TRACOPOWER TEN 30 DC/DC Converter 75V dc Input Through Hole, 80 °C Max Temp -40 °C Min
- TRACOPOWER TEN 15 DC-DC Converter 36 → 75 V dc Input Through Hole, +85°C Max Temp -40°C
- TRACOPOWER TEN 5 DC/DC Converter 75V Input Through Hole
- TRACOPOWER TEN 25 DC-DC Converter 36 → 75 V dc Input Through Hole, +85°C Max Temp
- XP Power RDC DC-DC Converter 36 → 140 V dc Input Through Hole, +75°C Max Temp -40°C
- TRACOPOWER TEN 3 DC/DC Converter 75V Input Through Hole
- TRACOPOWER TEN 30WIN DC/DC Converter 75V dc Input PCB
- TRACOPOWER TEN 30WIN DC/DC Converter 36V dc Input PCB