TDK-Lambda DPX15W DC/DC Converter, 5V dc/ 3 A, 48V dc Input, 48V dc Input, DIN Rail 15 W, 85 °C Max Temp -40 °C Min Temp
- N° de stock RS:
- 204-0461
- Référence fabricant:
- DPX15-48WS05
- Fabricant:
- TDK-Lambda
Offre groupée disponible
Sous-total (1 unité)*
127,82 €
(TVA exclue)
154,66 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 10 unité(s) expédiée(s) à partir du 12 mai 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 127,82 € |
| 5 - 9 | 123,98 € |
| 10 - 24 | 120,13 € |
| 25 - 49 | 116,30 € |
| 50 + | 112,46 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 204-0461
- Référence fabricant:
- DPX15-48WS05
- Fabricant:
- TDK-Lambda
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | TDK-Lambda | |
| Output Voltage 1 | 5V dc | |
| Product Type | DC/DC Converter | |
| Maximum Input Voltage | 48V dc | |
| Minimum Input Voltage | 48V dc | |
| Output Current 1 | 3A | |
| Mount Type | DIN Rail | |
| MTBF | 147200h | |
| Number of Outputs | 1 | |
| Ripple and Noise | 50mV | |
| Isolation Voltage | 1.6kV | |
| Maximum Output Power | 15W | |
| Depth | 125mm | |
| Series | DPX15W | |
| Length | 125mm | |
| Standards/Approvals | CE | |
| Weight | 147.5g | |
| Width | 25.4mm | |
| Maximum Operating Temperature | 85°C | |
| Efficiency | 0.86% | |
| Minimum Operating Temperature | -40°C | |
| Sélectionner tout | ||
|---|---|---|
Marque TDK-Lambda | ||
Output Voltage 1 5V dc | ||
Product Type DC/DC Converter | ||
Maximum Input Voltage 48V dc | ||
Minimum Input Voltage 48V dc | ||
Output Current 1 3A | ||
Mount Type DIN Rail | ||
MTBF 147200h | ||
Number of Outputs 1 | ||
Ripple and Noise 50mV | ||
Isolation Voltage 1.6kV | ||
Maximum Output Power 15W | ||
Depth 125mm | ||
Series DPX15W | ||
Length 125mm | ||
Standards/Approvals CE | ||
Weight 147.5g | ||
Width 25.4mm | ||
Maximum Operating Temperature 85°C | ||
Efficiency 0.86% | ||
Minimum Operating Temperature -40°C | ||
- Pays d'origine :
- TW
The TDK-Lambda DPX DIN rail mount DC-DC converters are ideal for generating additional, isolated and regulated voltages from the common used 24Vdc DIN rail bus. Fully protected and with Class B EMC performance, the DPX is available with single, dual or triple output models and power levels from 15 to 60W. All commonly requested voltages are covered by the series, and the units will operate from 12V, 24V or 48V nominal dc inputs with either 2:1 or 4:1 ranges.
Meet EN55022 Class B
Input fuse protection
Input reverse polarity protection
Input in-rush current protection
Overload and short circuit protection
Over voltage protection
Reliable Snap-On for DIN rail TS-35/7.5 or TS-35/15
I/O-isolation 1600 VDC
Output DC-OK indicator
Liens connexes
- TDK-Lambda DPX15W DC/DC Converter 48V dc Input DIN Rail 15 W, 85 °C Max Temp -40 °C
- TDK-Lambda DPX15W DC/DC Converter 24V dc Input DIN Rail 15 W, 85 °C Max Temp -40 °C Min
- TDK-Lambda DPX15W DC/DC Converter 24V dc Input DIN Rail 15 W, 85 °C Max Temp -40 °C Min
- TDK-Lambda DPX DC/DC Converter 48V dc Input DIN Rail 40 W, 85 °C Max Temp -40 °C Min Temp
- TDK-Lambda PXG-M DC/DC Converter 48V dc Input Surface
- TDK-Lambda DPX30W DC/DC Converter 48V dc Input DIN Rail 30 W, 85 °C Max Temp -40 °C Min
- TDK-Lambda DPX30W DC/DC Converter 48V dc Input DIN Rail 30 W, 85 °C Max Temp -40 °C Min
- TDK-Lambda DPX30W DC/DC Converter 48V dc Input DIN Rail 30 W, 85 °C Max Temp -40 °C Min