Recom RFB DC/DC Converter, 5V dc/ 200 mA, 5.5V dc Input, 4.5V Input 1 W, Through Hole, 85 °C Max Temp -40 °C Min Temp,

Offre groupée disponible
Consulter les options de prix de gros

Sous-total (1 unité)*

2,09 €

(TVA exclue)

2,53 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 18 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 50 unité(s) expédiée(s) à partir du 06 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité
Prix par unité
1 - 42,09 €
5 - 92,03 €
10 - 241,97 €
25 - 491,90 €
50 +1,84 €

*Prix donné à titre indicatif

Options de conditionnement :
N° de stock RS:
185-5539
Référence fabricant:
RFB-0505S
Fabricant:
Recom
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Recom

Product Type

DC/DC Converter

Output Voltage 1

5V dc

Minimum Input Voltage

4.5V

Maximum Input Voltage

5.5V dc

Output Current 1

200mA

Mount Type

Through Hole

Input Ratio

1:1

MTBF

13200000h

Number of Outputs

1

Number of Pins

6

Isolation Voltage

1kV dc

Package Type

SIP-7

Maximum Output Power

1W

Length

19.6mm

Standards/Approvals

No

Series

RFB

Width

6mm

Depth

10.2mm

Minimum Operating Temperature

-40°C

Efficiency

80%

Maximum Operating Temperature

85°C

Pays d'origine :
TW

RECOM DC-DC Converter, SIP-7 Package, 80% Conversion Efficiency - RFB Series - RFB-0505S


Clamp down on unstable power supplies with this DC-DC converter from RECOM. It adjusts voltages between 4.5 and 5.5V DC to a 5V DC output to make sure your equipment gets the input it needs. Thanks to an output accuracy of ±2%, you can be sure things will tick along reliably. Speedy through-hole mounting lets you slot the unit onto a board without hassle. There's no need to worry about damage caused by electrical faults, as the device's built-in short-circuit protection shuts issues down as soon as they pop up.

• Standard pin layout for easy installation

• Typical ripple voltage of 55mV to dial down disruption from electrical noise

• Switches 80% of input loads, making for energy-efficient conversion

• Measures just 19.6 (L) x 6 (W) x 10.2mm (D) to slip into busy setups

• Plastic and resin insulation cuts the risk of electric shocks

Applications


• Portable cameras

• Manufacturing industry

• Power distribution systems

The RFB DC/DC converter is typically used in cost sensitive general purpose power isolation and voltage matching applications. Despite its low cost, it is a fully specified converter with 1kVDC isolation, industrial operating temperature range of -40°C to +85°C without derating and UL/EN certifications.

Can I use this converter in extreme temperatures?


Low cost 1W converter

1:1 input voltage range

SIP7 package

1kVDC isolation

Efficiency up to 80%

UL60950-1, CAN/CSA C22.2 No. 60950-1 certified

Yes, this product handles operating temperatures between -40°C and +85°C, so it's a safe bet for tough industrial conditions.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.