onsemi Rail to Rail Current Shunt Monitor Single 10-Pin Micro10
- N° de stock RS:
- 284-9042
- Référence fabricant:
- NCS21671DM200R2G
- Fabricant:
- onsemi
Sous-total (1 bobine de 4000 unités)*
2 860,00 €
(TVA exclue)
3 460,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 4 000 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 4000 + | 0,715 € | 2 860,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 284-9042
- Référence fabricant:
- NCS21671DM200R2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Current Shunt Monitor | |
| Power Supply Type | Single | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 5.5V | |
| CMRR - Common Mode Rejection Ratio | 109dB | |
| Number of Channels | 1 | |
| Supply Current | 80A | |
| Mount Type | Surface | |
| Package Type | Micro10 | |
| Pin Count | 10 | |
| GBP - Gain Bandwidth Product | 40kHz | |
| Minimum Operating Temperature | -40°C | |
| Series | NCS21671 | |
| Length | 0.086mm | |
| Standards/Approvals | RoHS, REACH | |
| Height | 0.043mm | |
| Width | 0.086 mm | |
| Output Type | Rail to Rail | |
| Automotive Standard | AEC-Q100 | |
| Maximum Operating Temperature | 85°C | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Current Shunt Monitor | ||
Power Supply Type Single | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 5.5V | ||
CMRR - Common Mode Rejection Ratio 109dB | ||
Number of Channels 1 | ||
Supply Current 80A | ||
Mount Type Surface | ||
Package Type Micro10 | ||
Pin Count 10 | ||
GBP - Gain Bandwidth Product 40kHz | ||
Minimum Operating Temperature -40°C | ||
Series NCS21671 | ||
Length 0.086mm | ||
Standards/Approvals RoHS, REACH | ||
Height 0.043mm | ||
Width 0.086 mm | ||
Output Type Rail to Rail | ||
Automotive Standard AEC-Q100 | ||
Maximum Operating Temperature 85°C | ||
The ON Semiconductor voltage output current sense amplifiers offered in gains of 25, 50, 100, and 200 V/V. These parts can measure voltage across shunts at common mode voltages from −0.1 V to 40 V, independent of supply voltage. The low offset of the zero drift architecture enables current sensing with voltage drops across sense resistors as low as 10 mV full scale. An optional enable function is available to reduce current drain through the input pins and power supply pins to negligible levels when disabled. Two optional pins are included to simplify input filtering.
Rail to rail output capability
Low current consumption 80 A maximum
Enable pin to turn off input and power supply currents
Liens connexes
- NCS21671DM200R2G onsemi, Current Shunt Monitor Single Rail to Rail 10-Pin Micro10
- NCS21671DM100R2G onsemi, Current Shunt Monitor Single Rail to Rail 10-Pin Micro10
- NCS21671DM050R2G onsemi, Current Shunt Monitor Single Rail to Rail 10-Pin Micro10
- NCS21671DM025R2G onsemi, Current Shunt Monitor Single Rail to Rail 10-Pin Micro10
- NCS211RSQT2G onsemi, Current Shunt Monitor Single Rail to Rail 6-Pin SC-70
- NCV211RSQT2G onsemi, Current Shunt Monitor Single Rail to Rail 6-Pin SC-70
- SP Amp Current Shunt Monitor Single 18V
- NCS21674DMG200R2G onsemi, Current Shunt Monitor Dual 8-Pin Micro8