NCV211RSQT2G onsemi Rail to Rail Current Shunt Monitor Single 6-Pin SC-70
- N° de stock RS:
- 189-0464
- Référence fabricant:
- NCV211RSQT2G
- Fabricant:
- onsemi
Sous-total (1 paquet de 25 unités)*
15,575 €
(TVA exclue)
18,85 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- 650 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 25 + | 0,623 € | 15,58 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 189-0464
- Référence fabricant:
- NCV211RSQT2G
- Fabricant:
- onsemi
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | onsemi | |
| Product Type | Current Shunt Monitor | |
| Power Supply Type | Single | |
| Minimum Supply Voltage | 2V | |
| Maximum Supply Voltage | 26V | |
| CMRR - Common Mode Rejection Ratio | 105dB | |
| Number of Channels | 1 | |
| Supply Current | 80μA | |
| Mount Type | Surface | |
| Package Type | SC-70 | |
| Pin Count | 6 | |
| Minimum Operating Temperature | -40°C | |
| GBP - Gain Bandwidth Product | 25kHz | |
| Height | 1mm | |
| Series | NCV211 | |
| Length | 2.2mm | |
| Width | 1.35 mm | |
| Standards/Approvals | No | |
| Maximum Operating Temperature | 125°C | |
| Output Type | Rail to Rail | |
| Automotive Standard | AEC-Q100 | |
| Sélectionner tout | ||
|---|---|---|
Marque onsemi | ||
Product Type Current Shunt Monitor | ||
Power Supply Type Single | ||
Minimum Supply Voltage 2V | ||
Maximum Supply Voltage 26V | ||
CMRR - Common Mode Rejection Ratio 105dB | ||
Number of Channels 1 | ||
Supply Current 80μA | ||
Mount Type Surface | ||
Package Type SC-70 | ||
Pin Count 6 | ||
Minimum Operating Temperature -40°C | ||
GBP - Gain Bandwidth Product 25kHz | ||
Height 1mm | ||
Series NCV211 | ||
Length 2.2mm | ||
Width 1.35 mm | ||
Standards/Approvals No | ||
Maximum Operating Temperature 125°C | ||
Output Type Rail to Rail | ||
Automotive Standard AEC-Q100 | ||
The NCS211R and NCV211R are voltage output, current sense amplifiers that can measure voltage across shunts at common-mode voltages from -0.3 V to 26 V, independent of supply voltage. With a fixed gain of 500 V/V, the low offset of the zero-drift architecture enables current sensing across the shunt with maximum voltage drops as low as 10 mV full-scale. These devices can operate from a single +2.2 V to +26 V power supply, drawing a maximum of 80 μA of supply current. Available in SC70-6 package Additional gain options are available: NCS213R (50 V/V), NCS214R (100 V/V) , NCS210R (200 V/V)
Wide Common Mode Input Range: -0.3 to 26 V
Low Offset Voltage: ±35 μV max.
Low Offset Drift: 0.5 μV/°C max.
Supply Voltage: 2.2 to 26 V
High-side current sensing for high voltage systems
Low Ohm value current sense resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibility
Applications
Power Monitoring
Power Adapters
LED Power Supply
Over Current Protection
Automotive
Closed Loop Feedback Circuits
End Products
White Goods
Automotive
Lighting
Laptop/Notebooks PC
Fast Chargers in Smartphones and Tablet
Telecom DC-DC modules
E-Cigarettes
Computing Servers
Liens connexes
- onsemi Rail to Rail Current Shunt Monitor Single 6-Pin SC-70
- NCS211RSQT2G onsemi Rail to Rail Current Shunt Monitor Single 6-Pin SC-70
- Texas Instruments Voltage Current Shunt Monitor Single 6-Pin SC-70
- INA199A3DCKT Texas Instruments Voltage Current Shunt Monitor Single 6-Pin SC-70
- INA213BIDCKT Texas Instruments Voltage Current Shunt Monitor Single 6-Pin SC-70
- INA212AIDCKT Texas Instruments Voltage Current Shunt Monitor Single 6-Pin SC-70
- onsemi Rail to Rail Current Shunt Monitor Single 10-Pin Micro10
- NCS21671DM050R2G onsemi Rail to Rail Current Shunt Monitor Single 10-Pin Micro10