Références fabricant

Fluke I1010 Current Clamp, 1000 A DC Max, AC/DC Adapter, 600 A ac AC Max, Voltage Output - UKAS

N° de stock RS:: 459-3578
Référence fabricant:: 1640971
Fabricant:: Fluke

Fluke I1010 Current Clamp, 1000 A DC Max, AC/DC Adapter, 600 A ac AC Max, Voltage Output - UKAS

Sous-total (1 unité)*

848,00 €

(TVA exclue)

1 026,08 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

5 unité(s) expédiée(s) à partir du 30 avril 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	848,00 €

*Prix donné à titre indicatif

N° de stock RS:: 459-3578
Référence fabricant:: 1640971
Fabricant:: Fluke

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Fluke
	Product Type	Current Clamp
	Adapter Type	AC/DC
	Maximum DC Current	1000A
	Maximum AC Current	600A ac
	Accuracy	±2 % + 0.5 A
	Maximum Conductor Size	30mm
	Cable Length	1.6m
	Output Type	Voltage
	Connector Type	4 mm Plug
	Battery Life	60h
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	50°C
	Standards/Approvals	No
	Model Number	I1010
	Safety Category Voltage	600V
	Calibrated	UKAS
	Safety Category Level	CAT III

	Sélectionner tout
	Marque Fluke
	Product Type Current Clamp
	Adapter Type AC/DC
	Maximum DC Current 1000A
	Maximum AC Current 600A ac
	Accuracy ±2 % + 0.5 A
	Maximum Conductor Size 30mm
	Cable Length 1.6m
	Output Type Voltage
	Connector Type 4 mm Plug
	Battery Life 60h
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 50°C
	Standards/Approvals No
	Model Number I1010
	Safety Category Voltage 600V
	Calibrated UKAS
	Safety Category Level CAT III

Statut RoHS : Exempté

Pays d'origine :: TH

Fluke Current Clamp, 600A Maximum AC Current, 1000A Maximum DC Current - 1640971

This current clamp is a portable Hall-effect probe designed to extend multimeter current ranges for both AC and DC measurements in industrial and laboratory settings. It enables non-intrusive measurement of high currents up to 1000A DC and 600A AC while operating from a battery source and delivering a voltage output compatible with standard test instruments.

Features & Benefits

• Measures up to 1000A DC for high-current diagnostics
• Handles 600A AC for alternating-current assessments
• Basic accuracy ±2% + 0.5A for dependable readings
• Output level 1 mV/A for direct multimeter input
• Zero error adjustment to remove offset before measurement
• Battery operation delivers 60 h for extended field use

Applications

• Suitable for load testing of large DC supply banks
• Ideal for commissioning motor drives with high inrush currents
• Used with multimetres for fault finding in distribution panels
• Can be used for monitoring current in control cabinets
• Used for maintenance checks on industrial automation equipment

What connector type is provided to link the probe to instruments?

The probe terminates in shrouded 4mm plugs to Interface with standard multimeter inputs.

How large a conductor will the jaw accept for measurement?

The jaw accommodates conductors up to 30mm diameter to fit multiple cable sizes.

What temperature range can it be used within on site?

It operates between -10°C to 50°C, covering most indoor industrial environments.

What is the usable frequency range for AC measurements?

The device measures from DC up to 10 kHz, allowing both mains and higher-frequency signals to be assessed.

What safety classification should technicians note when using it?

It is rated to CAT III 600V for application within building electrical installations.