TE Connectivity Heat Shrink Terminal and Splices DuraSeal Service and Repair Crimp Terminal Kit
- N° de stock RS:
- 408-9681
- Numéro d'article Distrelec:
- 303-99-906
- Référence fabricant:
- DS-MIXT-04-RSU
- Fabricant:
- TE Connectivity
Bénéficiez d'une remise sur les achats en gros
Ajoutez 5 de plus pour économiser 12%
Consulter les options de prix de grosSous-total (1 unité)*
75,37 €
(TVA exclue)
91,20 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 6 unité(s) expédiée(s) à partir du 18 novembre 2026
- Plus 130 unité(s) expédiée(s) à partir du 18 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | Économie |
|---|---|---|
| 1 - 4 | 75,37 € | - |
| 5 - 24 | 65,80 € | 12% |
| 25 + | 64,06 € | 15% |
*Prix donné à titre indicatif
- N° de stock RS:
- 408-9681
- Numéro d'article Distrelec:
- 303-99-906
- Référence fabricant:
- DS-MIXT-04-RSU
- Fabricant:
- TE Connectivity
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | TE Connectivity | |
| Product Type | Crimp Terminal Kit | |
| Sub Type | DuraSeal Service and Repair | |
| Connector Type | Heat Shrink Terminal and Splices | |
| Kit Contents | Splice, Spade, Ring, Receptacle | |
| Standards/Approvals | No | |
| Sélectionner tout | ||
|---|---|---|
Marque TE Connectivity | ||
Product Type Crimp Terminal Kit | ||
Sub Type DuraSeal Service and Repair | ||
Connector Type Heat Shrink Terminal and Splices | ||
Kit Contents Splice, Spade, Ring, Receptacle | ||
Standards/Approvals No | ||
- Pays d'origine :
- MX
TE Connectivity Duraseal Terminal and Splice Service and Repair Kit 1
This Duraseal terminal and splice service and repair kit contains a range of insulated Duraseal crimp terminals, with a wire size range of 0.5mm to 6mm2, coloured blue, red and yellow. Storage for the Duraseal crimp terminal and splice service and repair kit comes in a sturdy plastic case, with convenient compartments and a locking lid.
For details of kit contents please see table.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed
Liens connexes
- TE Connectivity Heat Shrink Terminal and Splices DuraSeal Service and Repair Crimp Terminal Kit
- HellermannTyton Heat Shrink Terminal and Splices Service and Repair Crimp Terminal Kit
- TE Connectivity Yellow Tin 10 AWG
- TE Connectivity Red Tin 22 AWG
- TE Connectivity Blue Tin 10 AWG
- TE Connectivity Plasti-Grip Terminal, PIDG Splices/Terminal Automotive Service Crimp Terminal Kit
- TE Connectivity PIDG Splices/Terminal, Plasti-Grip Terminal PIDG Introduction Service Crimp Terminal Kit
- TE Connectivity Plasti-Grip Terminal and Splices Bootlace Ferrule Crimp Terminal Kit
